Project import generated by Copybara.

GitOrigin-RevId: 34ad3ffe08adfca17fcb4e4a47bb5f3b113687be

third_party/nixpkgs/doc/languages-frameworks/agda.section.md

@@ -158,7 +158,23 @@ This can be overridden.
 
 By default, Agda sources are files ending on `.agda`, or literate Agda files ending on `.lagda`, `.lagda.tex`, `.lagda.org`, `.lagda.md`, `.lagda.rst`. The list of recognised Agda source extensions can be extended by setting the `extraExtensions` config variable.
 
-## Adding Agda packages to Nixpkgs {#adding-agda-packages-to-nixpkgs}
+## Maintaining the Agda package set on Nixpkgs {#maintaining-the-agda-package-set-on-nixpkgs}
+
+We are aiming at providing all common Agda libraries as packages on `nixpkgs`,
+and keeping them up to date.
+Contributions and maintenance help is always appreciated,
+but the maintenance effort is typically low since the Agda ecosystem is quite small.
+
+The `nixpkgs` Agda package set tries to take up a role similar to that of [Stackage](https://www.stackage.org/) in the Haskell world.
+It is a curated set of libraries that:
+
+1. Always work together.
+2. Are as up-to-date as possible.
+
+While the Haskell ecosystem is huge, and Stackage is highly automatised,
+the Agda package set is small and can (still) be maintained by hand.
+
+### Adding Agda packages to Nixpkgs {#adding-agda-packages-to-nixpkgs}
 
 To add an Agda package to `nixpkgs`, the derivation should be written to `pkgs/development/libraries/agda/${library-name}/` and an entry should be added to `pkgs/top-level/agda-packages.nix`. Here it is called in a scope with access to all other Agda libraries, so the top line of the `default.nix` can look like:
 
@@ -192,3 +208,49 @@ mkDerivation {
 This library has a file called `.agda-lib`, and so we give an empty string to `libraryFile` as nothing precedes `.agda-lib` in the filename. This file contains `name: IAL-1.3`, and so we let `libraryName =  "IAL-1.3"`. This library does not use an `Everything.agda` file and instead has a Makefile, so there is no need to set `everythingFile` and we set a custom `buildPhase`.
 
 When writing an Agda package it is essential to make sure that no `.agda-lib` file gets added to the store as a single file (for example by using `writeText`). This causes Agda to think that the nix store is a Agda library and it will attempt to write to it whenever it typechecks something. See [https://github.com/agda/agda/issues/4613](https://github.com/agda/agda/issues/4613).
+
+In the pull request adding this library,
+you can test whether it builds correctly by writing in a comment:
+
+```
+@ofborg build agdaPackages.iowa-stdlib
+```
+
+### Maintaining Agda packages
+
+As mentioned before, the aim is to have a compatible, and up-to-date package set.
+These two conditions sometimes exclude each other:
+For example, if we update `agdaPackages.standard-library` because there was an upstream release,
+this will typically break many reverse dependencies,
+i.e. downstream Agda libraries that depend on the standard library.
+In `nixpkgs` we are typically among the first to notice this,
+since we have build tests in place to check this.
+
+In a pull request updating e.g. the standard library, you should write the following comment:
+
+```
+@ofborg build agdaPackages.standard-library.passthru.tests
+```
+
+This will build all reverse dependencies of the standard library,
+for example `agdaPackages.agda-categories`, or `agdaPackages.generic`.
+
+In some cases it is useful to build _all_ Agda packages.
+This can be done with the following Github comment:
+
+```
+@ofborg build agda.passthru.tests.allPackages
+```
+
+Sometimes, the builds of the reverse dependencies fail because they have not yet been updated and released.
+You should drop the maintainers a quick issue notifying them of the breakage,
+citing the build error (which you can get from the ofborg logs).
+If you are motivated, you might even send a pull request that fixes it.
+Usually, the maintainers will answer within a week or two with a new release.
+Bumping the version of that reverse dependency should be a further commit on your PR.
+
+In the rare case that a new release is not to be expected within an acceptable time,
+simply mark the broken package as broken by setting `meta.broken = true;`.
+This will exclude it from the build test.
+It can be added later when it is fixed,
+and does not hinder the advancement of the whole package set in the meantime.

third_party/nixpkgs/doc/languages-frameworks/dotnet.section.md

@@ -28,8 +28,7 @@ mkShell {
   packages = [
     (with dotnetCorePackages; combinePackages [
       sdk_3_1
-      sdk_3_0
+      sdk_5_0
-      sdk_2_1
     ])
   ];
 }
@@ -64,9 +63,9 @@ $ dotnet --info
 
 The `dotnetCorePackages.sdk_X_Y` is preferred over the old dotnet-sdk as both major and minor version are very important for a dotnet environment. If a given minor version isn't present (or was changed), then this will likely break your ability to build a project.
 
-## dotnetCorePackages.sdk vs dotnetCorePackages.net vs dotnetCorePackages.netcore vs dotnetCorePackages.aspnetcore {#dotnetcorepackages.sdk-vs-dotnetcorepackages.net-vs-dotnetcorepackages.netcore-vs-dotnetcorepackages.aspnetcore}
+## dotnetCorePackages.sdk vs dotnetCorePackages.runtime vs dotnetCorePackages.aspnetcore {#dotnetcorepackages.sdk-vs-dotnetcorepackages.runtime-vs-dotnetcorepackages.aspnetcore}
 
-The `dotnetCorePackages.sdk` contains both a runtime and the full sdk of a given version. The `net`, `netcore` and `aspnetcore` packages are meant to serve as minimal runtimes to deploy alongside already built applications. For runtime versions >= .NET 5 `net` is used while `netcore` is used for older .NET Core runtime version.
+The `dotnetCorePackages.sdk` contains both a runtime and the full sdk of a given version. The `runtime` and `aspnetcore` packages are meant to serve as minimal runtimes to deploy alongside already built applications.
 
 ## Packaging a Dotnet Application {#packaging-a-dotnet-application}
 

third_party/nixpkgs/doc/languages-frameworks/rust.section.md

@@ -237,22 +237,6 @@ where they are known to differ. But there are ways to customize the argument:
    --target /nix/store/asdfasdfsadf-thumb-crazy.json # contains {"foo":"","bar":""}
    ```
 
-Finally, as an ad-hoc escape hatch, a computed target (string or JSON file
-path) can be passed directly to `buildRustPackage`:
-
-```nix
-pkgs.rustPlatform.buildRustPackage {
-  /* ... */
-  target = "x86_64-fortanix-unknown-sgx";
-}
-```
-
-This is useful to avoid rebuilding Rust tools, since they are actually target
-agnostic and don't need to be rebuilt. But in the future, we should always
-build the Rust tools and standard library crates separately so there is no
-reason not to take the `stdenv.hostPlatform.rustc`-modifying approach, and the
-ad-hoc escape hatch to `buildRustPackage` can be removed.
-
 Note that currently custom targets aren't compiled with `std`, so `cargo test`
 will fail. This can be ignored by adding `doCheck = false;` to your derivation.
 

third_party/nixpkgs/lib/licenses.nix

@@ -153,6 +153,11 @@ in mkLicense lset) ({
     free = false;
   };
 
+  capec = {
+    fullName = "Common Attack Pattern Enumeration and Classification";
+    url = "https://capec.mitre.org/about/termsofuse.html";
+  };
+
   clArtistic = {
     spdxId = "ClArtistic";
     fullName = "Clarified Artistic License";

third_party/nixpkgs/maintainers/maintainer-list.nix

@@ -1197,6 +1197,12 @@
     email = "sivaraman.balaji@gmail.com";
     name = "Balaji Sivaraman";
   };
+  balodja = {
+    email = "balodja@gmail.com";
+    github = "balodja";
+    githubId = 294444;
+    name = "Vladimir Korolev";
+  };
   baloo = {
     email = "nixpkgs@superbaloo.net";
     github = "baloo";
@@ -2437,6 +2443,12 @@
     githubId = 4331004;
     name = "Naoya Hatta";
   };
+  dalpd = {
+    email = "denizalpd@ogr.iu.edu.tr";
+    github = "dalpd";
+    githubId = 16895361;
+    name = "Deniz Alp Durmaz";
+  };
   DamienCassou = {
     email = "damien@cassou.me";
     github = "DamienCassou";
@@ -4082,6 +4094,12 @@
     githubId = 16470252;
     name = "Gemini Lasswell";
   };
+  gbtb = {
+    email = "goodbetterthebeast3@gmail.com";
+    github = "gbtb";
+    githubId = 37017396;
+    name = "gbtb";
+  };
   gebner = {
     email = "gebner@gebner.org";
     github = "gebner";
@@ -4409,6 +4427,16 @@
     githubId = 54728477;
     name = "Happy River";
   };
+  hardselius = {
+    email = "martin@hardselius.dev";
+    github = "hardselius";
+    githubId = 1422583;
+    name = "Martin Hardselius";
+    keys = [{
+      longkeyid = "rsa4096/0x03A6E6F786936619";
+      fingerprint = "3F35 E4CA CBF4 2DE1 2E90  53E5 03A6 E6F7 8693 6619";
+    }];
+  };
   haslersn = {
     email = "haslersn@fius.informatik.uni-stuttgart.de";
     github = "haslersn";
@@ -6973,6 +7001,12 @@
     githubId = 458783;
     name = "Martin Gammelsæter";
   };
+  martfont = {
+    name = "Martino Fontana";
+    email = "tinozzo123@tutanota.com";
+    github = "SuperSamus";
+    githubId = 40663462;
+  };
   marzipankaiser = {
     email = "nixos@gaisseml.de";
     github = "marzipankaiser";
@@ -10507,6 +10541,13 @@
     githubId = 4477729;
     name = "Sergey Mironov";
   };
+  smitop = {
+    name = "Smitty van Bodegom";
+    email = "me@smitop.com";
+    matrix = "@smitop:kde.org";
+    github = "Smittyvb";
+    githubId = 10530973;
+  };
   sna = {
     email = "abouzahra.9@wright.edu";
     github = "s-na";
@@ -12359,6 +12400,12 @@
     githubId = 452;
     name = "Yurii Rashkovskii";
   };
+  yrd = {
+    name = "Yannik Rödel";
+    email = "nix@yannik.info";
+    github = "yrd";
+    githubId = 1820447;
+  };
   ysndr = {
     email = "me@ysndr.de";
     github = "ysndr";

third_party/nixpkgs/maintainers/scripts/update-luarocks-packages

@@ -33,8 +33,7 @@ TMP_FILE="$(mktemp)"
 GENERATED_NIXFILE="pkgs/development/lua-modules/generated-packages.nix"
 LUAROCKS_CONFIG="$NIXPKGS_PATH/maintainers/scripts/luarocks-config.lua"
 
-HEADER = """
+HEADER = """/* {GENERATED_NIXFILE} is an auto-generated file -- DO NOT EDIT!
-/* {GENERATED_NIXFILE} is an auto-generated file -- DO NOT EDIT!
 Regenerate it with:
 nixpkgs$ ./maintainers/scripts/update-luarocks-packages
 
@@ -99,9 +98,8 @@ class LuaEditor(Editor):
             header2 = textwrap.dedent(
             # header2 = inspect.cleandoc(
             """
-                { self, stdenv, lib, fetchurl, fetchgit, ... } @ args:
+                { self, stdenv, lib, fetchurl, fetchgit, callPackage, ... } @ args:
-                self: super:
+                final: prev:
-                with self;
                 {
             """)
             f.write(header2)
@@ -199,6 +197,7 @@ def generate_pkg_nix(plug: LuaPlugin):
 
     log.debug("running %s", ' '.join(cmd))
     output = subprocess.check_output(cmd, text=True)
+    output = "callPackage(" + output.strip() + ") {};\n\n"
     return (plug, output)
 
 def main():

third_party/nixpkgs/maintainers/team-list.nix

@@ -164,6 +164,16 @@ with lib.maintainers; {
     scope = "Maintain Kodi and related packages.";
   };
 
+  linux-kernel = {
+    members = [
+      TredwellGit
+      ma27
+      nequissimus
+      qyliss
+    ];
+    scope = "Maintain the Linux kernel.";
+  };
+
   mate = {
     members = [
       j03

third_party/nixpkgs/nixos/doc/manual/from_md/release-notes/rl-2111.section.xml

@@ -83,7 +83,8 @@
           which introduced some breaking changes to the experimental OCI
           manifest format. See
           <link xlink:href="https://github.com/helm/community/blob/main/hips/hip-0006.md">HIP
-          6</link> for more details.
+          6</link> for more details. <literal>helmfile</literal> also
+          defaults to 0.141.0, which is the minimum compatible version.
         </para>
       </listitem>
       <listitem>
@@ -1554,6 +1555,47 @@ Superuser created successfully.
           encapsulation.
         </para>
       </listitem>
+      <listitem>
+        <para>
+          Changing systemd <literal>.socket</literal> units now restarts
+          them and stops the service that is activated by them.
+          Additionally, services with
+          <literal>stopOnChange = false</literal> don’t break anymore
+          when they are socket-activated.
+        </para>
+      </listitem>
+      <listitem>
+        <para>
+          The <literal>virtualisation.libvirtd</literal> module has been
+          refactored and updated with new options:
+        </para>
+        <itemizedlist spacing="compact">
+          <listitem>
+            <para>
+              <literal>virtualisation.libvirtd.qemu*</literal> options
+              (e.g.:
+              <literal>virtualisation.libvirtd.qemuRunAsRoot</literal>)
+              were moved to
+              <link xlink:href="options.html#opt-virtualisation.libvirtd.qemu"><literal>virtualisation.libvirtd.qemu</literal></link>
+              submodule,
+            </para>
+          </listitem>
+          <listitem>
+            <para>
+              software TPM1/TPM2 support (e.g.: Windows 11 guests)
+              (<link xlink:href="options.html#opt-virtualisation.libvirtd.qemu.swtpm"><literal>virtualisation.libvirtd.qemu.swtpm</literal></link>),
+            </para>
+          </listitem>
+          <listitem>
+            <para>
+              custom OVMF package (e.g.:
+              <literal>pkgs.OVMFFull</literal> with HTTP, CSM and Secure
+              Boot support)
+              (<link xlink:href="options.html#opt-virtualisation.libvirtd.qemu.ovmf.package"><literal>virtualisation.libvirtd.qemu.ovmf.package</literal></link>).
+            </para>
+          </listitem>
+        </itemizedlist>
+      </listitem>
     </itemizedlist>
   </section>
 </section>

third_party/nixpkgs/nixos/doc/manual/release-notes/rl-2111.section.md

@@ -29,6 +29,7 @@ In addition to numerous new and upgraded packages, this release has the followin
 - Pantheon desktop has been updated to version 6. Due to changes of screen locker, if locking doesn't work for you, please try `gsettings set org.gnome.desktop.lockdown disable-lock-screen false`.
 
 - `kubernetes-helm` now defaults to 3.7.0, which introduced some breaking changes to the experimental OCI manifest format. See [HIP 6](https://github.com/helm/community/blob/main/hips/hip-0006.md) for more details.
+  `helmfile` also defaults to 0.141.0, which is the minimum compatible version.
 
 - GNOME has been upgraded to 41. Please take a look at their [Release Notes](https://help.gnome.org/misc/release-notes/41.0/) for details.
 
@@ -449,3 +450,10 @@ In addition to numerous new and upgraded packages, this release has the followin
 - The `networking` module has a new `networking.fooOverUDP` option to configure Foo-over-UDP encapsulations.
 
 - `networking.sits` now supports Foo-over-UDP encapsulation.
+
+- Changing systemd `.socket` units now restarts them and stops the service that is activated by them. Additionally, services with `stopOnChange = false` don't break anymore when they are socket-activated.
+
+-  The `virtualisation.libvirtd` module has been refactored and updated with new options:
+    - `virtualisation.libvirtd.qemu*` options (e.g.: `virtualisation.libvirtd.qemuRunAsRoot`) were moved to [`virtualisation.libvirtd.qemu`](options.html#opt-virtualisation.libvirtd.qemu) submodule,
+    - software TPM1/TPM2 support (e.g.: Windows 11 guests) ([`virtualisation.libvirtd.qemu.swtpm`](options.html#opt-virtualisation.libvirtd.qemu.swtpm)),
+    - custom OVMF package (e.g.: `pkgs.OVMFFull` with HTTP, CSM and Secure Boot support) ([`virtualisation.libvirtd.qemu.ovmf.package`](options.html#opt-virtualisation.libvirtd.qemu.ovmf.package)).

third_party/nixpkgs/nixos/lib/build-vms.nix

@@ -68,9 +68,8 @@ rec {
                       prefixLength = 24;
                   } ];
                 });
-            in
+
-            { key = "ip-address";
+              networkConfig =
-              config =
                 { networking.hostName = mkDefault m.fst;
 
                   networking.interfaces = listToAttrs interfaces;
@@ -96,6 +95,14 @@ rec {
                     in flip concatMap interfacesNumbered
                       ({ fst, snd }: qemu-common.qemuNICFlags snd fst m.snd);
                 };
+
+              in
+                { key = "ip-address";
+                  config = networkConfig // {
+                    # Expose the networkConfig items for tests like nixops
+                    # that need to recreate the network config.
+                    system.build.networkConfig = networkConfig;
+                  };
                 }
           )
           (getAttr m.fst nodes)

third_party/nixpkgs/nixos/lib/make-options-doc/default.nix

@@ -83,10 +83,13 @@ let
   optionsListVisible = lib.filter (opt: opt.visible && !opt.internal) (lib.optionAttrSetToDocList options);
 
   # Customly sort option list for the man page.
+  # Always ensure that the sort order matches sortXML.py!
   optionsList = lib.sort optionLess optionsListDesc;
 
   # Convert the list of options into an XML file.
-  optionsXML = builtins.toFile "options.xml" (builtins.toXML optionsList);
+  # This file is *not* sorted sorted to save on eval time, since the docbook XML
+  # and the manpage depend on it and thus we evaluate this on every system rebuild.
+  optionsXML = builtins.toFile "options.xml" (builtins.toXML optionsListDesc);
 
   optionsNix = builtins.listToAttrs (map (o: { name = o.name; value = removeAttrs o ["name" "visible" "internal"]; }) optionsList);
 
@@ -185,9 +188,10 @@ in {
       exit 1
     fi
 
+    ${pkgs.python3Minimal}/bin/python ${./sortXML.py} $optionsXML sorted.xml
     ${pkgs.libxslt.bin}/bin/xsltproc \
       --stringparam revision '${revision}' \
-      -o intermediate.xml ${./options-to-docbook.xsl} $optionsXML
+      -o intermediate.xml ${./options-to-docbook.xsl} sorted.xml
     ${pkgs.libxslt.bin}/bin/xsltproc \
       -o "$out" ${./postprocess-option-descriptions.xsl} intermediate.xml
   '';

third_party/nixpkgs/nixos/lib/make-options-doc/sortXML.py

@@ -0,0 +1,28 @@
+import xml.etree.ElementTree as ET
+import sys
+
+tree = ET.parse(sys.argv[1])
+# the xml tree is of the form
+# <expr><list> {all options, each an attrs} </list></expr>
+options = list(tree.getroot().find('list'))
+
+def sortKey(opt):
+    def order(s):
+        if s.startswith("enable"):
+            return 0
+        if s.startswith("package"):
+            return 1
+        return 2
+
+    return [
+        (order(p.attrib['value']), p.attrib['value'])
+        for p in opt.findall('attr[@name="loc"]/list/string')
+    ]
+
+# always ensure that the sort order matches the order used in the nix expression!
+options.sort(key=sortKey)
+
+doc = ET.Element("expr")
+newOptions = ET.SubElement(doc, "list")
+newOptions.extend(options)
+ET.ElementTree(doc).write(sys.argv[2], encoding='utf-8')

third_party/nixpkgs/nixos/maintainers/scripts/azure-new/examples/basic/image.nix

@@ -1,6 +1,6 @@
 let
   pkgs = (import ../../../../../../default.nix {});
-  machine = import "${pkgs.path}/nixos/lib/eval-config.nix" {
+  machine = import (pkgs.path + "/nixos/lib/eval-config.nix") {
     system = "x86_64-linux";
     modules = [
       ({config, ...}: { imports = [ ./system.nix ]; })

third_party/nixpkgs/nixos/modules/installer/tools/nixos-enter.sh

@@ -68,7 +68,7 @@ mount --rbind /sys "$mountPoint/sys"
     fi
 
     # Run the activation script. Set $LOCALE_ARCHIVE to supress some Perl locale warnings.
-    LOCALE_ARCHIVE="$system/sw/lib/locale/locale-archive" chroot "$mountPoint" "$system/activate" 1>&2 || true
+    LOCALE_ARCHIVE="$system/sw/lib/locale/locale-archive" IN_NIXOS_ENTER=1 chroot "$mountPoint" "$system/activate" 1>&2 || true
 
     # Create /tmp
     chroot "$mountPoint" systemd-tmpfiles --create --remove --exclude-prefix=/dev 1>&2 || true

third_party/nixpkgs/nixos/modules/programs/evince.nix

@@ -4,7 +4,9 @@
 
 with lib;
 
-{
+let cfg = config.programs.evince;
+
+in {
 
   # Added 2019-08-09
   imports = [
@@ -22,6 +24,13 @@ with lib;
       enable = mkEnableOption
         "Evince, the GNOME document viewer";
 
+      package = mkOption {
+        type = types.package;
+        default = pkgs.evince;
+        defaultText = literalExpression "pkgs.evince";
+        description = "Evince derivation to use.";
+      };
+
     };
 
   };
@@ -31,11 +40,11 @@ with lib;
 
   config = mkIf config.programs.evince.enable {
 
-    environment.systemPackages = [ pkgs.evince ];
+    environment.systemPackages = [ cfg.package ];
 
-    services.dbus.packages = [ pkgs.evince ];
+    services.dbus.packages = [ cfg.package ];
 
-    systemd.packages = [ pkgs.evince ];
+    systemd.packages = [ cfg.package ];
 
   };
 

third_party/nixpkgs/nixos/modules/programs/git.nix

@@ -20,7 +20,7 @@ in
       };
 
       config = mkOption {
-        type = types.attrs;
+        type = with types; attrsOf (attrsOf anything);
         default = { };
         example = {
           init.defaultBranch = "main";

third_party/nixpkgs/nixos/modules/services/mail/roundcube.nix

@@ -7,7 +7,7 @@ let
   fpm = config.services.phpfpm.pools.roundcube;
   localDB = cfg.database.host == "localhost";
   user = cfg.database.username;
-  phpWithPspell = pkgs.php74.withExtensions ({ enabled, all }: [ all.pspell ] ++ enabled);
+  phpWithPspell = pkgs.php80.withExtensions ({ enabled, all }: [ all.pspell ] ++ enabled);
 in
 {
   options.services.roundcube = {

third_party/nixpkgs/nixos/modules/services/misc/subsonic.nix

@@ -109,7 +109,7 @@ let cfg = config.services.subsonic; in {
       after = [ "network.target" ];
       wantedBy = [ "multi-user.target" ];
       script = ''
-        ${pkgs.jre}/bin/java -Xmx${toString cfg.maxMemory}m \
+        ${pkgs.jre8}/bin/java -Xmx${toString cfg.maxMemory}m \
           -Dsubsonic.home=${cfg.home} \
           -Dsubsonic.host=${cfg.listenAddress} \
           -Dsubsonic.port=${toString cfg.port} \

third_party/nixpkgs/nixos/modules/services/monitoring/prometheus/exporters/node.nix

@@ -35,10 +35,15 @@ in
           ${concatMapStringsSep " " (x: "--no-collector." + x) cfg.disabledCollectors} \
           --web.listen-address ${cfg.listenAddress}:${toString cfg.port} ${concatStringsSep " " cfg.extraFlags}
       '';
-      # The systemd collector needs AF_UNIX
+      RestrictAddressFamilies = optionals (any (collector: (collector == "logind" || collector == "systemd")) cfg.enabledCollectors) [
-      RestrictAddressFamilies = lib.optional (lib.any (x: x == "systemd") cfg.enabledCollectors) "AF_UNIX";
+        # needs access to dbus via unix sockets (logind/systemd)
+        "AF_UNIX"
+      ] ++ optionals (any (collector: (collector == "network_route" || collector == "wifi")) cfg.enabledCollectors) [
+        # needs netlink sockets for wireless collector
+        "AF_NETLINK"
+      ];
       # The timex collector needs to access clock APIs
-      ProtectClock = lib.any (x: x == "timex") cfg.disabledCollectors;
+      ProtectClock = any (collector: collector == "timex") cfg.disabledCollectors;
     };
   };
 }

third_party/nixpkgs/nixos/modules/services/network-filesystems/samba.nix

@@ -87,13 +87,20 @@ in
           <note>
             <para>If you use the firewall consider adding the following:</para>
           <programlisting>
-            networking.firewall.allowedTCPPorts = [ 139 445 ];
+            services.samba.openFirewall = true;
-            networking.firewall.allowedUDPPorts = [ 137 138 ];
           </programlisting>
           </note>
         '';
       };
 
+      openFirewall = mkOption {
+        type = types.bool;
+        default = false;
+        description = ''
+          Whether to automatically open the necessary ports in the firewall.
+        '';
+      };
+
       enableNmbd = mkOption {
         type = types.bool;
         default = true;
@@ -235,7 +242,10 @@ in
         };
 
         security.pam.services.samba = {};
-        environment.systemPackages = [ config.services.samba.package ];
+        environment.systemPackages = [ cfg.package ];
+
+        networking.firewall.allowedTCPPorts = mkIf cfg.openFirewall [ 139 445 ];
+        networking.firewall.allowedUDPPorts = mkIf cfg.openFirewall [ 137 138 ];
       })
     ];
 

third_party/nixpkgs/nixos/modules/services/security/privacyidea.nix

@@ -272,7 +272,7 @@ in
     (mkIf cfg.ldap-proxy.enable {
 
       systemd.services.privacyidea-ldap-proxy = let
-        ldap-proxy-env = pkgs.python2.withPackages (ps: [ ps.privacyidea-ldap-proxy ]);
+        ldap-proxy-env = pkgs.python3.withPackages (ps: [ ps.privacyidea-ldap-proxy ]);
       in {
         description = "privacyIDEA LDAP proxy";
         wantedBy = [ "multi-user.target" ];

third_party/nixpkgs/nixos/modules/services/torrent/transmission.nix

@@ -152,6 +152,8 @@ in
       install -d -m '${cfg.downloadDirPermissions}' -o '${cfg.user}' -g '${cfg.group}' '${cfg.settings.download-dir}'
       '' + optionalString cfg.settings.incomplete-dir-enabled ''
       install -d -m '${cfg.downloadDirPermissions}' -o '${cfg.user}' -g '${cfg.group}' '${cfg.settings.incomplete-dir}'
+      '' + optionalString cfg.settings.watch-dir-enabled ''
+      install -d -m '${cfg.downloadDirPermissions}' -o '${cfg.user}' -g '${cfg.group}' '${cfg.settings.watch-dir}'
       '';
 
     assertions = [

third_party/nixpkgs/nixos/modules/services/web-apps/hedgedoc.nix

@@ -539,6 +539,69 @@ in
                 Specify the OAuth token URL.
               '';
             };
+            baseURL = mkOption {
+              type = with types; nullOr str;
+              default = null;
+              description = ''
+                Specify the OAuth base URL.
+              '';
+            };
+            userProfileURL = mkOption {
+              type = with types; nullOr str;
+              default = null;
+              description = ''
+                Specify the OAuth userprofile URL.
+              '';
+            };
+            userProfileUsernameAttr = mkOption {
+              type = with types; nullOr str;
+              default = null;
+              description = ''
+                Specify the name of the attribute for the username from the claim.
+              '';
+            };
+            userProfileDisplayNameAttr = mkOption {
+              type = with types; nullOr str;
+              default = null;
+              description = ''
+                Specify the name of the attribute for the display name from the claim.
+              '';
+            };
+            userProfileEmailAttr = mkOption {
+              type = with types; nullOr str;
+              default = null;
+              description = ''
+                Specify the name of the attribute for the email from the claim.
+              '';
+            };
+            scope = mkOption {
+              type = with types; nullOr str;
+              default = null;
+              description = ''
+                Specify the OAuth scope.
+              '';
+            };
+            providerName = mkOption {
+              type = with types; nullOr str;
+              default = null;
+              description = ''
+                Specify the name to be displayed for this strategy.
+              '';
+            };
+            rolesClaim = mkOption {
+              type = with types; nullOr str;
+              default = null;
+              description = ''
+                Specify the role claim name.
+              '';
+            };
+            accessRole = mkOption {
+              type = with types; nullOr str;
+              default = null;
+              description = ''
+                Specify role which should be included in the ID token roles claim to grant access
+              '';
+            };
             clientID = mkOption {
               type = types.str;
               description = ''

third_party/nixpkgs/nixos/modules/services/web-apps/jitsi-meet.nix

@@ -144,6 +144,8 @@ in
       '';
     };
 
+    caddy.enable = mkEnableOption "Whether to enablle caddy reverse proxy to expose jitsi-meet";
+
     prosody.enable = mkOption {
       type = bool;
       default = true;
@@ -322,6 +324,42 @@ in
       };
     };
 
+    services.caddy = mkIf cfg.caddy.enable {
+      enable = mkDefault true;
+      virtualHosts.${cfg.hostName} = {
+        extraConfig =
+        let
+          templatedJitsiMeet = pkgs.runCommand "templated-jitsi-meet" {} ''
+            cp -R ${pkgs.jitsi-meet}/* .
+            for file in *.html **/*.html ; do
+              ${pkgs.sd}/bin/sd '<!--#include virtual="(.*)" -->' '{{ include "$1" }}' $file
+            done
+            rm config.js
+            rm interface_config.js
+            cp -R . $out
+            cp ${overrideJs "${pkgs.jitsi-meet}/config.js" "config" (recursiveUpdate defaultCfg cfg.config) cfg.extraConfig} $out/config.js
+            cp ${overrideJs "${pkgs.jitsi-meet}/interface_config.js" "interfaceConfig" cfg.interfaceConfig ""} $out/interface_config.js
+            cp ./libs/external_api.min.js $out/external_api.js
+          '';
+        in ''
+          handle /http-bind {
+            header Host ${cfg.hostName}
+            reverse_proxy 127.0.0.1:5280
+          }
+          handle /xmpp-websocket {
+            reverse_proxy 127.0.0.1:5280
+          }
+          handle {
+            templates
+            root * ${templatedJitsiMeet}
+            try_files {path} {path}
+            try_files {path} /index.html
+            file_server
+          }
+        '';
+      };
+    };
+
     services.jitsi-videobridge = mkIf cfg.videobridge.enable {
       enable = true;
       xmppConfigs."localhost" = {

third_party/nixpkgs/nixos/modules/services/x11/desktop-managers/pantheon.nix

@@ -219,6 +219,7 @@ in
       ] config.environment.pantheon.excludePackages);
 
       programs.evince.enable = mkDefault true;
+      programs.evince.package = pkgs.pantheon.evince;
       programs.file-roller.enable = mkDefault true;
 
       # Settings from elementary-default-settings

third_party/nixpkgs/nixos/modules/system/activation/switch-to-configuration.pl

@@ -11,7 +11,6 @@ use Cwd 'abs_path';
 
 my $out = "@out@";
 
-# FIXME: maybe we should use /proc/1/exe to get the current systemd.
 my $curSystemd = abs_path("/run/current-system/sw/bin");
 
 # To be robust against interruption, record what units need to be started etc.
@@ -19,13 +18,16 @@ my $startListFile = "/run/nixos/start-list";
 my $restartListFile = "/run/nixos/restart-list";
 my $reloadListFile = "/run/nixos/reload-list";
 
-# Parse restart/reload requests by the activation script
+# Parse restart/reload requests by the activation script.
+# Activation scripts may write newline-separated units to this
+# file and switch-to-configuration will handle them. While
+# `stopIfChanged = true` is ignored, switch-to-configuration will
+# handle `restartIfChanged = false` and `reloadIfChanged = true`.
+# This also works for socket-activated units.
 my $restartByActivationFile = "/run/nixos/activation-restart-list";
-my $reloadByActivationFile = "/run/nixos/activation-reload-list";
 my $dryRestartByActivationFile = "/run/nixos/dry-activation-restart-list";
-my $dryReloadByActivationFile = "/run/nixos/dry-activation-reload-list";
 
-make_path("/run/nixos", { mode => 0755 });
+make_path("/run/nixos", { mode => oct(755) });
 
 my $action = shift @ARGV;
 
@@ -147,6 +149,92 @@ sub fingerprintUnit {
     return abs_path($s) . (-f "${s}.d/overrides.conf" ? " " . abs_path "${s}.d/overrides.conf" : "");
 }
 
+sub handleModifiedUnit {
+    my ($unit, $baseName, $newUnitFile, $activePrev, $unitsToStop, $unitsToStart, $unitsToReload, $unitsToRestart, $unitsToSkip) = @_;
+
+    if ($unit eq "sysinit.target" || $unit eq "basic.target" || $unit eq "multi-user.target" || $unit eq "graphical.target" || $unit =~ /\.slice$/ || $unit =~ /\.path$/) {
+        # Do nothing.  These cannot be restarted directly.
+        # Slices and Paths don't have to be restarted since
+        # properties (resource limits and inotify watches)
+        # seem to get applied on daemon-reload.
+    } elsif ($unit =~ /\.mount$/) {
+        # Reload the changed mount unit to force a remount.
+        $unitsToReload->{$unit} = 1;
+        recordUnit($reloadListFile, $unit);
+    } else {
+        my $unitInfo = parseUnit($newUnitFile);
+        if (boolIsTrue($unitInfo->{'X-ReloadIfChanged'} // "no")) {
+            $unitsToReload->{$unit} = 1;
+            recordUnit($reloadListFile, $unit);
+        }
+        elsif (!boolIsTrue($unitInfo->{'X-RestartIfChanged'} // "yes") || boolIsTrue($unitInfo->{'RefuseManualStop'} // "no") || boolIsTrue($unitInfo->{'X-OnlyManualStart'} // "no")) {
+            $unitsToSkip->{$unit} = 1;
+        } else {
+            # If this unit is socket-activated, then stop it instead
+            # of restarting it to make sure the new version of it is
+            # socket-activated.
+            my $socketActivated = 0;
+            if ($unit =~ /\.service$/) {
+                my @sockets = split / /, ($unitInfo->{Sockets} // "");
+                if (scalar @sockets == 0) {
+                    @sockets = ("$baseName.socket");
+                }
+                foreach my $socket (@sockets) {
+                    if (-e "$out/etc/systemd/system/$socket") {
+                        $socketActivated = 1;
+                        $unitsToStop->{$unit} = 1;
+                        # If the socket was not running previously,
+                        # start it now.
+                        if (not defined $activePrev->{$socket}) {
+                            $unitsToStart->{$socket} = 1;
+                        }
+                    }
+                }
+            }
+
+            # Don't do the rest of this for socket-activated units
+            # because we handled these above where we stop the unit.
+            # Since only services can be socket-activated, the
+            # following condition always evaluates to `true` for
+            # non-service units.
+            if ($socketActivated) {
+                return;
+            }
+
+            # If we are restarting a socket, also stop the corresponding
+            # service. This is required because restarting a socket
+            # when the service is already activated fails.
+            if ($unit =~ /\.socket$/) {
+                my $service = $unitInfo->{Service} // "";
+                if ($service eq "") {
+                    $service = "$baseName.service";
+                }
+                if (defined $activePrev->{$service}) {
+                    $unitsToStop->{$service} = 1;
+                }
+                $unitsToRestart->{$unit} = 1;
+                recordUnit($restartListFile, $unit);
+            } else {
+                # Always restart non-services instead of stopping and starting them
+                # because it doesn't make sense to stop them with a config from
+                # the old evaluation.
+                if (!boolIsTrue($unitInfo->{'X-StopIfChanged'} // "yes") || $unit !~ /\.service$/) {
+                    # This unit should be restarted instead of
+                    # stopped and started.
+                    $unitsToRestart->{$unit} = 1;
+                    recordUnit($restartListFile, $unit);
+                } else {
+                    # We write to a file to ensure that the
+                    # service gets restarted if we're interrupted.
+                    $unitsToStart->{$unit} = 1;
+                    recordUnit($startListFile, $unit);
+                    $unitsToStop->{$unit} = 1;
+                }
+            }
+        }
+    }
+}
+
 # Figure out what units need to be stopped, started, restarted or reloaded.
 my (%unitsToStop, %unitsToSkip, %unitsToStart, %unitsToRestart, %unitsToReload);
 
@@ -219,65 +307,7 @@ while (my ($unit, $state) = each %{$activePrev}) {
         }
 
         elsif (fingerprintUnit($prevUnitFile) ne fingerprintUnit($newUnitFile)) {
-            if ($unit eq "sysinit.target" || $unit eq "basic.target" || $unit eq "multi-user.target" || $unit eq "graphical.target") {
+            handleModifiedUnit($unit, $baseName, $newUnitFile, $activePrev, \%unitsToStop, \%unitsToStart, \%unitsToReload, \%unitsToRestart, %unitsToSkip);
-                # Do nothing.  These cannot be restarted directly.
-            } elsif ($unit =~ /\.mount$/) {
-                # Reload the changed mount unit to force a remount.
-                $unitsToReload{$unit} = 1;
-                recordUnit($reloadListFile, $unit);
-            } elsif ($unit =~ /\.socket$/ || $unit =~ /\.path$/ || $unit =~ /\.slice$/) {
-                # FIXME: do something?
-            } else {
-                my $unitInfo = parseUnit($newUnitFile);
-                if (boolIsTrue($unitInfo->{'X-ReloadIfChanged'} // "no")) {
-                    $unitsToReload{$unit} = 1;
-                    recordUnit($reloadListFile, $unit);
-                }
-                elsif (!boolIsTrue($unitInfo->{'X-RestartIfChanged'} // "yes") || boolIsTrue($unitInfo->{'RefuseManualStop'} // "no") || boolIsTrue($unitInfo->{'X-OnlyManualStart'} // "no")) {
-                    $unitsToSkip{$unit} = 1;
-                } else {
-                    if (!boolIsTrue($unitInfo->{'X-StopIfChanged'} // "yes")) {
-                        # This unit should be restarted instead of
-                        # stopped and started.
-                        $unitsToRestart{$unit} = 1;
-                        recordUnit($restartListFile, $unit);
-                    } else {
-                        # If this unit is socket-activated, then stop the
-                        # socket unit(s) as well, and restart the
-                        # socket(s) instead of the service.
-                        my $socketActivated = 0;
-                        if ($unit =~ /\.service$/) {
-                            my @sockets = split / /, ($unitInfo->{Sockets} // "");
-                            if (scalar @sockets == 0) {
-                                @sockets = ("$baseName.socket");
-                            }
-                            foreach my $socket (@sockets) {
-                                if (defined $activePrev->{$socket}) {
-                                    $unitsToStop{$socket} = 1;
-                                    # Only restart sockets that actually
-                                    # exist in new configuration:
-                                    if (-e "$out/etc/systemd/system/$socket") {
-                                        $unitsToStart{$socket} = 1;
-                                        recordUnit($startListFile, $socket);
-                                        $socketActivated = 1;
-                                    }
-                                }
-                            }
-                        }
-
-                        # If the unit is not socket-activated, record
-                        # that this unit needs to be started below.
-                        # We write this to a file to ensure that the
-                        # service gets restarted if we're interrupted.
-                        if (!$socketActivated) {
-                            $unitsToStart{$unit} = 1;
-                            recordUnit($startListFile, $unit);
-                        }
-
-                        $unitsToStop{$unit} = 1;
-                    }
-                }
-            }
         }
     }
 }
@@ -362,8 +392,6 @@ sub filterUnits {
 }
 
 my @unitsToStopFiltered = filterUnits(\%unitsToStop);
-my @unitsToStartFiltered = filterUnits(\%unitsToStart);
-
 
 # Show dry-run actions.
 if ($action eq "dry-activate") {
@@ -375,21 +403,44 @@ if ($action eq "dry-activate") {
     print STDERR "would activate the configuration...\n";
     system("$out/dry-activate", "$out");
 
-    $unitsToRestart{$_} = 1 foreach
+    # Handle the activation script requesting the restart or reload of a unit.
-        split('\n', read_file($dryRestartByActivationFile, err_mode => 'quiet') // "");
+    my %unitsToAlsoStop;
+    my %unitsToAlsoSkip;
+    foreach (split('\n', read_file($dryRestartByActivationFile, err_mode => 'quiet') // "")) {
+        my $unit = $_;
+        my $baseUnit = $unit;
+        my $newUnitFile = "$out/etc/systemd/system/$baseUnit";
 
-    $unitsToReload{$_} = 1 foreach
+        # Detect template instances.
-        split('\n', read_file($dryReloadByActivationFile, err_mode => 'quiet') // "");
+        if (!-e $newUnitFile && $unit =~ /^(.*)@[^\.]*\.(.*)$/) {
+          $baseUnit = "$1\@.$2";
+          $newUnitFile = "$out/etc/systemd/system/$baseUnit";
+        }
+
+        my $baseName = $baseUnit;
+        $baseName =~ s/\.[a-z]*$//;
+
+        handleModifiedUnit($unit, $baseName, $newUnitFile, $activePrev, \%unitsToAlsoStop, \%unitsToStart, \%unitsToReload, \%unitsToRestart, %unitsToAlsoSkip);
+    }
+    unlink($dryRestartByActivationFile);
+
+    my @unitsToAlsoStopFiltered = filterUnits(\%unitsToAlsoStop);
+    if (scalar(keys %unitsToAlsoStop) > 0) {
+        print STDERR "would stop the following units as well: ", join(", ", @unitsToAlsoStopFiltered), "\n"
+            if scalar @unitsToAlsoStopFiltered;
+    }
+
+    print STDERR "would NOT restart the following changed units as well: ", join(", ", sort(keys %unitsToAlsoSkip)), "\n"
+        if scalar(keys %unitsToAlsoSkip) > 0;
 
     print STDERR "would restart systemd\n" if $restartSystemd;
-    print STDERR "would restart the following units: ", join(", ", sort(keys %unitsToRestart)), "\n"
-        if scalar(keys %unitsToRestart) > 0;
-    print STDERR "would start the following units: ", join(", ", @unitsToStartFiltered), "\n"
-        if scalar @unitsToStartFiltered;
     print STDERR "would reload the following units: ", join(", ", sort(keys %unitsToReload)), "\n"
         if scalar(keys %unitsToReload) > 0;
-    unlink($dryRestartByActivationFile);
+    print STDERR "would restart the following units: ", join(", ", sort(keys %unitsToRestart)), "\n"
-    unlink($dryReloadByActivationFile);
+        if scalar(keys %unitsToRestart) > 0;
+    my @unitsToStartFiltered = filterUnits(\%unitsToStart);
+    print STDERR "would start the following units: ", join(", ", @unitsToStartFiltered), "\n"
+        if scalar @unitsToStartFiltered;
     exit 0;
 }
 
@@ -400,7 +451,7 @@ if (scalar (keys %unitsToStop) > 0) {
     print STDERR "stopping the following units: ", join(", ", @unitsToStopFiltered), "\n"
         if scalar @unitsToStopFiltered;
     # Use current version of systemctl binary before daemon is reexeced.
-    system("$curSystemd/systemctl", "stop", "--", sort(keys %unitsToStop)); # FIXME: ignore errors?
+    system("$curSystemd/systemctl", "stop", "--", sort(keys %unitsToStop));
 }
 
 print STDERR "NOT restarting the following changed units: ", join(", ", sort(keys %unitsToSkip)), "\n"
@@ -414,12 +465,38 @@ system("$out/activate", "$out") == 0 or $res = 2;
 
 # Handle the activation script requesting the restart or reload of a unit.
 # We can only restart and reload (not stop/start) because the units to be
-# stopped are already stopped before the activation script is run.
+# stopped are already stopped before the activation script is run. We do however
-$unitsToRestart{$_} = 1 foreach
+# make an exception for services that are socket-activated and that have to be stopped
-    split('\n', read_file($restartByActivationFile, err_mode => 'quiet') // "");
+# instead of being restarted.
+my %unitsToAlsoStop;
+my %unitsToAlsoSkip;
+foreach (split('\n', read_file($restartByActivationFile, err_mode => 'quiet') // "")) {
+    my $unit = $_;
+    my $baseUnit = $unit;
+    my $newUnitFile = "$out/etc/systemd/system/$baseUnit";
 
-$unitsToReload{$_} = 1 foreach
+    # Detect template instances.
-    split('\n', read_file($reloadByActivationFile, err_mode => 'quiet') // "");
+    if (!-e $newUnitFile && $unit =~ /^(.*)@[^\.]*\.(.*)$/) {
+      $baseUnit = "$1\@.$2";
+      $newUnitFile = "$out/etc/systemd/system/$baseUnit";
+    }
+
+    my $baseName = $baseUnit;
+    $baseName =~ s/\.[a-z]*$//;
+
+    handleModifiedUnit($unit, $baseName, $newUnitFile, $activePrev, \%unitsToAlsoStop, \%unitsToStart, \%unitsToReload, \%unitsToRestart, %unitsToAlsoSkip);
+}
+unlink($restartByActivationFile);
+
+my @unitsToAlsoStopFiltered = filterUnits(\%unitsToAlsoStop);
+if (scalar(keys %unitsToAlsoStop) > 0) {
+    print STDERR "stopping the following units as well: ", join(", ", @unitsToAlsoStopFiltered), "\n"
+        if scalar @unitsToAlsoStopFiltered;
+    system("$curSystemd/systemctl", "stop", "--", sort(keys %unitsToAlsoStop));
+}
+
+print STDERR "NOT restarting the following changed units as well: ", join(", ", sort(keys %unitsToAlsoSkip)), "\n"
+    if scalar(keys %unitsToAlsoSkip) > 0;
 
 # Restart systemd if necessary. Note that this is done using the
 # current version of systemd, just in case the new one has trouble
@@ -460,14 +537,40 @@ if (scalar(keys %unitsToReload) > 0) {
     print STDERR "reloading the following units: ", join(", ", sort(keys %unitsToReload)), "\n";
     system("@systemd@/bin/systemctl", "reload", "--", sort(keys %unitsToReload)) == 0 or $res = 4;
     unlink($reloadListFile);
-    unlink($reloadByActivationFile);
 }
 
 # Restart changed services (those that have to be restarted rather
 # than stopped and started).
 if (scalar(keys %unitsToRestart) > 0) {
     print STDERR "restarting the following units: ", join(", ", sort(keys %unitsToRestart)), "\n";
-    system("@systemd@/bin/systemctl", "restart", "--", sort(keys %unitsToRestart)) == 0 or $res = 4;
+
+    # We split the units to be restarted into sockets and non-sockets.
+    # This is because restarting sockets may fail which is not bad by
+    # itself but which will prevent changes on the sockets. We usually
+    # restart the socket and stop the service before that. Restarting
+    # the socket will fail however when the service was re-activated
+    # in the meantime. There is no proper way to prevent that from happening.
+    my @unitsWithErrorHandling = grep { $_ !~ /\.socket$/ } sort(keys %unitsToRestart);
+    my @unitsWithoutErrorHandling = grep { $_ =~ /\.socket$/ } sort(keys %unitsToRestart);
+
+    if (scalar(@unitsWithErrorHandling) > 0) {
+        system("@systemd@/bin/systemctl", "restart", "--", @unitsWithErrorHandling) == 0 or $res = 4;
+    }
+    if (scalar(@unitsWithoutErrorHandling) > 0) {
+        # Don't print warnings from systemctl
+        no warnings 'once';
+        open(OLDERR, ">&", \*STDERR);
+        close(STDERR);
+
+        my $ret = system("@systemd@/bin/systemctl", "restart", "--", @unitsWithoutErrorHandling);
+
+        # Print stderr again
+        open(STDERR, ">&OLDERR");
+
+        if ($ret ne 0) {
+            print STDERR "warning: some sockets failed to restart. Please check your journal (journalctl -eb) and act accordingly.\n";
+        }
+    }
     unlink($restartListFile);
     unlink($restartByActivationFile);
 }
@@ -478,6 +581,7 @@ if (scalar(keys %unitsToRestart) > 0) {
 # that are symlinks to other units.  We shouldn't start both at the
 # same time because we'll get a "Failed to add path to set" error from
 # systemd.
+my @unitsToStartFiltered = filterUnits(\%unitsToStart);
 print STDERR "starting the following units: ", join(", ", @unitsToStartFiltered), "\n"
     if scalar @unitsToStartFiltered;
 system("@systemd@/bin/systemctl", "start", "--", sort(keys %unitsToStart)) == 0 or $res = 4;
@@ -485,7 +589,7 @@ unlink($startListFile);
 
 
 # Print failed and new units.
-my (@failed, @new, @restarting);
+my (@failed, @new);
 my $activeNew = getActiveUnits;
 while (my ($unit, $state) = each %{$activeNew}) {
     if ($state->{state} eq "failed") {
@@ -501,7 +605,9 @@ while (my ($unit, $state) = each %{$activeNew}) {
             push @failed, $unit;
         }
     }
-    elsif ($state->{state} ne "failed" && !defined $activePrev->{$unit}) {
+    # Ignore scopes since they are not managed by this script but rather
+    # created and managed by third-party services via the systemd dbus API.
+    elsif ($state->{state} ne "failed" && !defined $activePrev->{$unit} && $unit !~ /\.scope$/) {
         push @new, $unit;
     }
 }

third_party/nixpkgs/nixos/modules/system/activation/top-level.nix

@@ -84,6 +84,13 @@ let
       export localeArchive="${config.i18n.glibcLocales}/lib/locale/locale-archive"
       substituteAll ${./switch-to-configuration.pl} $out/bin/switch-to-configuration
       chmod +x $out/bin/switch-to-configuration
+      ${optionalString (pkgs.stdenv.hostPlatform == pkgs.stdenv.buildPlatform) ''
+        if ! output=$($perl/bin/perl -c $out/bin/switch-to-configuration 2>&1); then
+          echo "switch-to-configuration syntax is not valid:"
+          echo "$output"
+          exit 1
+        fi
+      ''}
 
       echo -n "${toString config.system.extraDependencies}" > $out/extra-dependencies
 

third_party/nixpkgs/nixos/modules/system/boot/luksroot.nix

@@ -332,6 +332,7 @@ let
 
         if [ $? == 0 ]; then
             echo -ne "$new_salt\n$new_iterations" > /crypt-storage${dev.yubikey.storage.path}
+            sync /crypt-storage${dev.yubikey.storage.path}
         else
             echo "Warning: Could not update LUKS key, current challenge persists!"
         fi

third_party/nixpkgs/nixos/modules/virtualisation/libvirtd.nix

@@ -13,23 +13,140 @@ let
   '';
   ovmfFilePrefix = if pkgs.stdenv.isAarch64 then "AAVMF" else "OVMF";
   qemuConfigFile = pkgs.writeText "qemu.conf" ''
-    ${optionalString cfg.qemuOvmf ''
+    ${optionalString cfg.qemu.ovmf.enable ''
       nvram = [ "/run/libvirt/nix-ovmf/${ovmfFilePrefix}_CODE.fd:/run/libvirt/nix-ovmf/${ovmfFilePrefix}_VARS.fd" ]
     ''}
-    ${optionalString (!cfg.qemuRunAsRoot) ''
+    ${optionalString (!cfg.qemu.runAsRoot) ''
       user = "qemu-libvirtd"
       group = "qemu-libvirtd"
     ''}
-    ${cfg.qemuVerbatimConfig}
+    ${cfg.qemu.verbatimConfig}
   '';
   dirName = "libvirt";
   subDirs = list: [ dirName ] ++ map (e: "${dirName}/${e}") list;
 
-in {
+  ovmfModule = types.submodule {
+    options = {
+      enable = mkOption {
+        type = types.bool;
+        default = true;
+        description = ''
+          Allows libvirtd to take advantage of OVMF when creating new
+          QEMU VMs with UEFI boot.
+        '';
+      };
+
+      package = mkOption {
+        type = types.package;
+        default = pkgs.OVMF;
+        defaultText = literalExpression "pkgs.OVMF";
+        example = literalExpression "pkgs.OVMFFull";
+        description = ''
+          OVMF package to use.
+        '';
+      };
+    };
+  };
+
+  swtpmModule = types.submodule {
+    options = {
+      enable = mkOption {
+        type = types.bool;
+        default = false;
+        description = ''
+          Allows libvirtd to use swtpm to create an emulated TPM.
+        '';
+      };
+
+      package = mkOption {
+        type = types.package;
+        default = pkgs.swtpm;
+        defaultText = literalExpression "pkgs.swtpm";
+        description = ''
+          swtpm package to use.
+        '';
+      };
+    };
+  };
+
+  qemuModule = types.submodule {
+    options = {
+      package = mkOption {
+        type = types.package;
+        default = pkgs.qemu;
+        defaultText = literalExpression "pkgs.qemu";
+        description = ''
+          Qemu package to use with libvirt.
+          `pkgs.qemu` can emulate alien architectures (e.g. aarch64 on x86)
+          `pkgs.qemu_kvm` saves disk space allowing to emulate only host architectures.
+        '';
+      };
+
+      runAsRoot = mkOption {
+        type = types.bool;
+        default = true;
+        description = ''
+          If true,  libvirtd runs qemu as root.
+          If false, libvirtd runs qemu as unprivileged user qemu-libvirtd.
+          Changing this option to false may cause file permission issues
+          for existing guests. To fix these, manually change ownership
+          of affected files in /var/lib/libvirt/qemu to qemu-libvirtd.
+        '';
+      };
+
+      verbatimConfig = mkOption {
+        type = types.lines;
+        default = ''
+          namespaces = []
+        '';
+        description = ''
+          Contents written to the qemu configuration file, qemu.conf.
+          Make sure to include a proper namespace configuration when
+          supplying custom configuration.
+        '';
+      };
+
+      ovmf = mkOption {
+        type = ovmfModule;
+        default = { };
+        description = ''
+          QEMU's OVMF options.
+        '';
+      };
+
+      swtpm = mkOption {
+        type = swtpmModule;
+        default = { };
+        description = ''
+          QEMU's swtpm options.
+        '';
+      };
+    };
+  };
+in
+{
 
   imports = [
     (mkRemovedOptionModule [ "virtualisation" "libvirtd" "enableKVM" ]
-      "Set the option `virtualisation.libvirtd.qemuPackage' instead.")
+      "Set the option `virtualisation.libvirtd.qemu.package' instead.")
+    (mkRenamedOptionModule
+      [ "virtualisation" "libvirtd" "qemuPackage" ]
+      [ "virtualisation" "libvirtd" "qemu" "package" ])
+    (mkRenamedOptionModule
+      [ "virtualisation" "libvirtd" "qemuRunAsRoot" ]
+      [ "virtualisation" "libvirtd" "qemu" "runAsRoot" ])
+    (mkRenamedOptionModule
+      [ "virtualisation" "libvirtd" "qemuVerbatimConfig" ]
+      [ "virtualisation" "libvirtd" "qemu" "verbatimConfig" ])
+    (mkRenamedOptionModule
+      [ "virtualisation" "libvirtd" "qemuOvmf" ]
+      [ "virtualisation" "libvirtd" "qemu" "ovmf" "enable" ])
+    (mkRenamedOptionModule
+      [ "virtualisation" "libvirtd" "qemuOvmfPackage" ]
+      [ "virtualisation" "libvirtd" "qemu" "ovmf" "package" ])
+    (mkRenamedOptionModule
+      [ "virtualisation" "libvirtd" "qemuSwtpm" ]
+      [ "virtualisation" "libvirtd" "qemu" "swtpm" "enable" ])
   ];
 
   ###### interface
@@ -56,17 +173,6 @@ in {
       '';
     };
 
-    qemuPackage = mkOption {
-      type = types.package;
-      default = pkgs.qemu;
-      defaultText = literalExpression "pkgs.qemu";
-      description = ''
-        Qemu package to use with libvirt.
-        `pkgs.qemu` can emulate alien architectures (e.g. aarch64 on x86)
-        `pkgs.qemu_kvm` saves disk space allowing to emulate only host architectures.
-      '';
-    };
-
     extraConfig = mkOption {
       type = types.lines;
       default = "";
@@ -76,39 +182,6 @@ in {
       '';
     };
 
-    qemuRunAsRoot = mkOption {
-      type = types.bool;
-      default = true;
-      description = ''
-        If true,  libvirtd runs qemu as root.
-        If false, libvirtd runs qemu as unprivileged user qemu-libvirtd.
-        Changing this option to false may cause file permission issues
-        for existing guests. To fix these, manually change ownership
-        of affected files in /var/lib/libvirt/qemu to qemu-libvirtd.
-      '';
-    };
-
-    qemuVerbatimConfig = mkOption {
-      type = types.lines;
-      default = ''
-        namespaces = []
-      '';
-      description = ''
-        Contents written to the qemu configuration file, qemu.conf.
-        Make sure to include a proper namespace configuration when
-        supplying custom configuration.
-      '';
-    };
-
-    qemuOvmf = mkOption {
-      type = types.bool;
-      default = true;
-      description = ''
-        Allows libvirtd to take advantage of OVMF when creating new
-        QEMU VMs with UEFI boot.
-      '';
-    };
-
     extraOptions = mkOption {
       type = types.listOf types.str;
       default = [ ];
@@ -149,6 +222,13 @@ in {
       '';
     };
 
+    qemu = mkOption {
+      type = qemuModule;
+      default = { };
+      description = ''
+        QEMU related options.
+      '';
+    };
   };
 
 
@@ -161,13 +241,19 @@ in {
         assertion = config.security.polkit.enable;
         message = "The libvirtd module currently requires Polkit to be enabled ('security.polkit.enable = true').";
       }
+      {
+        assertion = builtins.elem "fd" cfg.qemu.ovmf.package.outputs;
+        message = "The option 'virtualisation.libvirtd.qemuOvmfPackage' needs a package that has an 'fd' output.";
+      }
     ];
 
     environment = {
       # this file is expected in /etc/qemu and not sysconfdir (/var/lib)
-      etc."qemu/bridge.conf".text = lib.concatMapStringsSep "\n" (e:
+      etc."qemu/bridge.conf".text = lib.concatMapStringsSep "\n"
-        "allow ${e}") cfg.allowedBridges;
+        (e:
-      systemPackages = with pkgs; [ libressl.nc iptables cfg.package cfg.qemuPackage ];
+          "allow ${e}")
+        cfg.allowedBridges;
+      systemPackages = with pkgs; [ libressl.nc iptables cfg.package cfg.qemu.package ];
       etc.ethertypes.source = "${pkgs.ebtables}/etc/ethertypes";
     };
 
@@ -209,17 +295,17 @@ in {
         cp -f ${qemuConfigFile} /var/lib/${dirName}/qemu.conf
 
         # stable (not GC'able as in /nix/store) paths for using in <emulator> section of xml configs
-        for emulator in ${cfg.package}/libexec/libvirt_lxc ${cfg.qemuPackage}/bin/qemu-kvm ${cfg.qemuPackage}/bin/qemu-system-*; do
+        for emulator in ${cfg.package}/libexec/libvirt_lxc ${cfg.qemu.package}/bin/qemu-kvm ${cfg.qemu.package}/bin/qemu-system-*; do
           ln -s --force "$emulator" /run/${dirName}/nix-emulators/
         done
 
         for helper in libexec/qemu-bridge-helper bin/qemu-pr-helper; do
-          ln -s --force ${cfg.qemuPackage}/$helper /run/${dirName}/nix-helpers/
+          ln -s --force ${cfg.qemu.package}/$helper /run/${dirName}/nix-helpers/
         done
 
-        ${optionalString cfg.qemuOvmf ''
+        ${optionalString cfg.qemu.ovmf.enable ''
-          ln -s --force ${pkgs.OVMF.fd}/FV/${ovmfFilePrefix}_CODE.fd /run/${dirName}/nix-ovmf/
+          ln -s --force ${cfg.qemu.ovmf.package.fd}/FV/${ovmfFilePrefix}_CODE.fd /run/${dirName}/nix-ovmf/
-          ln -s --force ${pkgs.OVMF.fd}/FV/${ovmfFilePrefix}_VARS.fd /run/${dirName}/nix-ovmf/
+          ln -s --force ${cfg.qemu.ovmf.package.fd}/FV/${ovmfFilePrefix}_VARS.fd /run/${dirName}/nix-ovmf/
         ''}
       '';
 
@@ -238,12 +324,17 @@ in {
         ++ optional vswitch.enable "ovs-vswitchd.service";
 
       environment.LIBVIRTD_ARGS = escapeShellArgs (
-        [ "--config" configFile
+        [
-          "--timeout" "120"     # from ${libvirt}/var/lib/sysconfig/libvirtd
+          "--config"
-        ] ++ cfg.extraOptions);
+          configFile
+          "--timeout"
+          "120" # from ${libvirt}/var/lib/sysconfig/libvirtd
+        ] ++ cfg.extraOptions
+      );
 
-      path = [ cfg.qemuPackage ] # libvirtd requires qemu-img to manage disk images
+      path = [ cfg.qemu.package ] # libvirtd requires qemu-img to manage disk images
-             ++ optional vswitch.enable vswitch.package;
+        ++ optional vswitch.enable vswitch.package
+        ++ optional cfg.qemu.swtpm.enable cfg.qemu.swtpm.package;
 
       serviceConfig = {
         Type = "notify";

third_party/nixpkgs/nixos/tests/all-tests.nix

@@ -311,6 +311,7 @@ in
   nitter = handleTest ./nitter.nix {};
   nix-serve = handleTest ./nix-ssh-serve.nix {};
   nix-ssh-serve = handleTest ./nix-ssh-serve.nix {};
+  nixops = handleTest ./nixops/default.nix {};
   nixos-generate-config = handleTest ./nixos-generate-config.nix {};
   node-red = handleTest ./node-red.nix {};
   nomad = handleTest ./nomad.nix {};

third_party/nixpkgs/nixos/tests/docker-tools.nix

@@ -383,5 +383,18 @@ import ./make-test-python.nix ({ pkgs, ... }: {
         docker.succeed(
             "tar -tf ${examples.exportBash} | grep '\./bin/bash' > /dev/null"
         )
+
+    with subtest("Ensure bare paths in contents are loaded correctly"):
+        docker.succeed(
+            "docker load --input='${examples.build-image-with-path}'",
+            "docker run --rm build-image-with-path bash -c '[[ -e /hello.txt ]]'",
+            "docker rmi build-image-with-path",
+        )
+        docker.succeed(
+            "${examples.layered-image-with-path} | docker load",
+            "docker run --rm layered-image-with-path bash -c '[[ -e /hello.txt ]]'",
+            "docker rmi layered-image-with-path",
+        )
+
   '';
 })

third_party/nixpkgs/nixos/tests/nixops/default.nix

@@ -0,0 +1,115 @@
+{ pkgs, ... }:
+let
+  inherit (pkgs) lib;
+
+  tests = {
+    # TODO: uncomment stable
+    #  - Blocked on https://github.com/NixOS/nixpkgs/issues/138584 which has a
+    #    PR in staging: https://github.com/NixOS/nixpkgs/pull/139986
+    #  - Alternatively, blocked on a NixOps 2 release
+    #    https://github.com/NixOS/nixops/issues/1242
+    # stable = testsLegacyNetwork { nixopsPkg = pkgs.nixops; };
+    unstable = testsForPackage { nixopsPkg = pkgs.nixopsUnstable; };
+
+    # inherit testsForPackage;
+  };
+
+  testsForPackage = lib.makeOverridable (args: lib.recurseIntoAttrs {
+    legacyNetwork = testLegacyNetwork args;
+  });
+
+  testLegacyNetwork = { nixopsPkg }: pkgs.nixosTest ({
+    nodes = {
+      deployer = { config, lib, nodes, pkgs, ... }: {
+        imports = [ ../../modules/installer/cd-dvd/channel.nix ];
+        environment.systemPackages = [ nixopsPkg ];
+        nix.binaryCaches = lib.mkForce [ ];
+        users.users.person.isNormalUser = true;
+        virtualisation.writableStore = true;
+        virtualisation.memorySize = 1024 /*MiB*/;
+        virtualisation.pathsInNixDB = [
+          pkgs.hello
+          pkgs.figlet
+
+          # This includes build dependencies all the way down. Not efficient,
+          # but we do need build deps to an *arbitrary* depth, which is hard to
+          # determine.
+          (allDrvOutputs nodes.server.config.system.build.toplevel)
+        ];
+      };
+      server = { lib, ... }: {
+        imports = [ ./legacy/base-configuration.nix ];
+      };
+    };
+
+    testScript = { nodes }:
+      let
+        deployerSetup = pkgs.writeScript "deployerSetup" ''
+          #!${pkgs.runtimeShell}
+          set -eux -o pipefail
+          cp --no-preserve=mode -r ${./legacy} unicorn
+          cp --no-preserve=mode ${../ssh-keys.nix} unicorn/ssh-keys.nix
+          mkdir -p ~/.ssh
+          cp ${snakeOilPrivateKey} ~/.ssh/id_ed25519
+          chmod 0400 ~/.ssh/id_ed25519
+        '';
+        serverNetworkJSON = pkgs.writeText "server-network.json"
+          (builtins.toJSON nodes.server.config.system.build.networkConfig);
+      in
+      ''
+        import shlex
+
+        def deployer_do(cmd):
+            cmd = shlex.quote(cmd)
+            return deployer.succeed(f"su person -l -c {cmd} &>/dev/console")
+
+        start_all()
+
+        deployer_do("cat /etc/hosts")
+
+        deployer_do("${deployerSetup}")
+        deployer_do("cp ${serverNetworkJSON} unicorn/server-network.json")
+
+        # Establish that ssh works, regardless of nixops
+        # Easy way to accept the server host key too.
+        server.wait_for_open_port(22)
+        deployer.wait_for_unit("network.target")
+
+        # Put newlines on console, to flush the console reader's line buffer
+        # in case nixops' last output did not end in a newline, as is the case
+        # with a status line (if implemented?)
+        deployer.succeed("while sleep 60s; do echo [60s passed] >/dev/console; done &")
+
+        deployer_do("cd ~/unicorn; ssh -oStrictHostKeyChecking=accept-new root@server echo hi")
+
+        # Create and deploy
+        deployer_do("cd ~/unicorn; nixops create")
+
+        deployer_do("cd ~/unicorn; nixops deploy --confirm")
+
+        deployer_do("cd ~/unicorn; nixops ssh server 'hello | figlet'")
+      '';
+  });
+
+  inherit (import ../ssh-keys.nix pkgs) snakeOilPrivateKey snakeOilPublicKey;
+
+  /*
+    Return a store path with a closure containing everything including
+    derivations and all build dependency outputs, all the way down.
+  */
+  allDrvOutputs = pkg:
+    let name = lib.strings.sanitizeDerivationName "allDrvOutputs-${pkg.pname or pkg.name or "unknown"}";
+    in
+    pkgs.runCommand name { refs = pkgs.writeReferencesToFile pkg.drvPath; } ''
+      touch $out
+      while read ref; do
+        case $ref in
+          *.drv)
+            cat $ref >>$out
+            ;;
+        esac
+      done <$refs
+    '';
+
+in
+tests

third_party/nixpkgs/nixos/tests/nixops/legacy/base-configuration.nix

@@ -0,0 +1,31 @@
+{ lib, modulesPath, pkgs, ... }:
+let
+  ssh-keys =
+    if builtins.pathExists ../../ssh-keys.nix
+    then # Outside sandbox
+      ../../ssh-keys.nix
+    else # In sandbox
+      ./ssh-keys.nix;
+
+  inherit (import ssh-keys pkgs)
+    snakeOilPrivateKey snakeOilPublicKey;
+in
+{
+  imports = [
+    (modulesPath + "/virtualisation/qemu-vm.nix")
+    (modulesPath + "/testing/test-instrumentation.nix")
+  ];
+  virtualisation.writableStore = true;
+  nix.binaryCaches = lib.mkForce [ ];
+  virtualisation.graphics = false;
+  documentation.enable = false;
+  services.qemuGuest.enable = true;
+  boot.loader.grub.enable = false;
+
+  services.openssh.enable = true;
+  users.users.root.openssh.authorizedKeys.keys = [
+    snakeOilPublicKey
+  ];
+  security.pam.services.sshd.limits =
+    [{ domain = "*"; item = "memlock"; type = "-"; value = 1024; }];
+}

third_party/nixpkgs/nixos/tests/nixops/legacy/nixops.nix

@@ -0,0 +1,15 @@
+{
+  network = {
+    description = "Legacy Network using <nixpkgs> and legacy state.";
+    # NB this is not really what makes it a legacy network; lack of flakes is.
+    storage.legacy = { };
+  };
+  server = { lib, pkgs, ... }: {
+    deployment.targetEnv = "none";
+    imports = [
+      ./base-configuration.nix
+      (lib.modules.importJSON ./server-network.json)
+    ];
+    environment.systemPackages = [ pkgs.hello pkgs.figlet ];
+  };
+}

third_party/nixpkgs/nixos/tests/samba.nix

@@ -20,6 +20,7 @@ import ./make-test-python.nix ({ pkgs, ... }:
       server =
         { ... }:
         { services.samba.enable = true;
+          services.samba.openFirewall = true;
           services.samba.shares.public =
             { path = "/public";
               "read only" = true;
@@ -27,8 +28,6 @@ import ./make-test-python.nix ({ pkgs, ... }:
               "guest ok" = "yes";
               comment = "Public samba share.";
             };
-          networking.firewall.allowedTCPPorts = [ 139 445 ];
-          networking.firewall.allowedUDPPorts = [ 137 138 ];
         };
     };
 

third_party/nixpkgs/nixos/tests/switch-test.nix

@@ -7,8 +7,217 @@ import ./make-test-python.nix ({ pkgs, ...} : {
   };
 
   nodes = {
-    machine = { ... }: {
+    machine = { config, pkgs, lib, ... }: {
+      environment.systemPackages = [ pkgs.socat ]; # for the socket activation stuff
       users.mutableUsers = false;
+
+      specialisation = {
+        # A system with a simple socket-activated unit
+        simple-socket.configuration = {
+          systemd.services.socket-activated.serviceConfig = {
+            ExecStart = pkgs.writeScript "socket-test.py" /* python */ ''
+              #!${pkgs.python3}/bin/python3
+
+              from socketserver import TCPServer, StreamRequestHandler
+              import socket
+
+              class Handler(StreamRequestHandler):
+                  def handle(self):
+                      self.wfile.write("hello".encode("utf-8"))
+
+              class Server(TCPServer):
+                  def __init__(self, server_address, handler_cls):
+                      # Invoke base but omit bind/listen steps (performed by systemd activation!)
+                      TCPServer.__init__(
+                          self, server_address, handler_cls, bind_and_activate=False)
+                      # Override socket
+                      self.socket = socket.fromfd(3, self.address_family, self.socket_type)
+
+              if __name__ == "__main__":
+                  server = Server(("localhost", 1234), Handler)
+                  server.serve_forever()
+            '';
+          };
+          systemd.sockets.socket-activated = {
+            wantedBy = [ "sockets.target" ];
+            listenStreams = [ "/run/test.sock" ];
+            socketConfig.SocketMode = lib.mkDefault "0777";
+          };
+        };
+
+        # The same system but the socket is modified
+        modified-socket.configuration = {
+          imports = [ config.specialisation.simple-socket.configuration ];
+          systemd.sockets.socket-activated.socketConfig.SocketMode = "0666";
+        };
+
+        # The same system but the service is modified
+        modified-service.configuration = {
+          imports = [ config.specialisation.simple-socket.configuration ];
+          systemd.services.socket-activated.serviceConfig.X-Test = "test";
+        };
+
+        # The same system but both service and socket are modified
+        modified-service-and-socket.configuration = {
+          imports = [ config.specialisation.simple-socket.configuration ];
+          systemd.services.socket-activated.serviceConfig.X-Test = "some_value";
+          systemd.sockets.socket-activated.socketConfig.SocketMode = "0444";
+        };
+
+        # A system with a socket-activated service and some simple services
+        service-and-socket.configuration = {
+          imports = [ config.specialisation.simple-socket.configuration ];
+          systemd.services.simple-service = {
+            wantedBy = [ "multi-user.target" ];
+            serviceConfig = {
+              Type = "oneshot";
+              RemainAfterExit = true;
+              ExecStart = "${pkgs.coreutils}/bin/true";
+            };
+          };
+
+          systemd.services.simple-restart-service = {
+            stopIfChanged = false;
+            wantedBy = [ "multi-user.target" ];
+            serviceConfig = {
+              Type = "oneshot";
+              RemainAfterExit = true;
+              ExecStart = "${pkgs.coreutils}/bin/true";
+            };
+          };
+
+          systemd.services.simple-reload-service = {
+            reloadIfChanged = true;
+            wantedBy = [ "multi-user.target" ];
+            serviceConfig = {
+              Type = "oneshot";
+              RemainAfterExit = true;
+              ExecStart = "${pkgs.coreutils}/bin/true";
+              ExecReload = "${pkgs.coreutils}/bin/true";
+            };
+          };
+
+          systemd.services.no-restart-service = {
+            restartIfChanged = false;
+            wantedBy = [ "multi-user.target" ];
+            serviceConfig = {
+              Type = "oneshot";
+              RemainAfterExit = true;
+              ExecStart = "${pkgs.coreutils}/bin/true";
+            };
+          };
+        };
+
+        # The same system but with an activation script that restarts all services
+        restart-and-reload-by-activation-script.configuration = {
+          imports = [ config.specialisation.service-and-socket.configuration ];
+          system.activationScripts.restart-and-reload-test = {
+            supportsDryActivation = true;
+            deps = [];
+            text = ''
+              if [ "$NIXOS_ACTION" = dry-activate ]; then
+                f=/run/nixos/dry-activation-restart-list
+              else
+                f=/run/nixos/activation-restart-list
+              fi
+              cat <<EOF >> "$f"
+              simple-service.service
+              simple-restart-service.service
+              simple-reload-service.service
+              no-restart-service.service
+              socket-activated.service
+              EOF
+            '';
+          };
+        };
+
+        # A system with a timer
+        with-timer.configuration = {
+          systemd.timers.test-timer = {
+            wantedBy = [ "timers.target" ];
+            timerConfig.OnCalendar = "@1395716396"; # chosen by fair dice roll
+          };
+          systemd.services.test-timer = {
+            serviceConfig = {
+              Type = "oneshot";
+              ExecStart = "${pkgs.coreutils}/bin/true";
+            };
+          };
+        };
+
+        # The same system but with another time
+        with-timer-modified.configuration = {
+          imports = [ config.specialisation.with-timer.configuration ];
+          systemd.timers.test-timer.timerConfig.OnCalendar = lib.mkForce "Fri 2012-11-23 16:00:00";
+        };
+
+        # A system with a systemd mount
+        with-mount.configuration = {
+          systemd.mounts = [
+            {
+              description = "Testmount";
+              what = "tmpfs";
+              type = "tmpfs";
+              where = "/testmount";
+              options = "size=1M";
+              wantedBy = [ "local-fs.target" ];
+            }
+          ];
+        };
+
+        # The same system but with another time
+        with-mount-modified.configuration = {
+          systemd.mounts = [
+            {
+              description = "Testmount";
+              what = "tmpfs";
+              type = "tmpfs";
+              where = "/testmount";
+              options = "size=10M";
+              wantedBy = [ "local-fs.target" ];
+            }
+          ];
+        };
+
+        # A system with a path unit
+        with-path.configuration = {
+          systemd.paths.test-watch = {
+            wantedBy = [ "paths.target" ];
+            pathConfig.PathExists = "/testpath";
+          };
+          systemd.services.test-watch = {
+            serviceConfig = {
+              Type = "oneshot";
+              ExecStart = "${pkgs.coreutils}/bin/touch /testpath-modified";
+            };
+          };
+        };
+
+        # The same system but watching another file
+        with-path-modified.configuration = {
+          imports = [ config.specialisation.with-path.configuration ];
+          systemd.paths.test-watch.pathConfig.PathExists = lib.mkForce "/testpath2";
+        };
+
+        # A system with a slice
+        with-slice.configuration = {
+          systemd.slices.testslice.sliceConfig.MemoryMax = "1"; # don't allow memory allocation
+          systemd.services.testservice = {
+            serviceConfig = {
+              Type = "oneshot";
+              RemainAfterExit = true;
+              ExecStart = "${pkgs.coreutils}/bin/true";
+              Slice = "testslice.slice";
+            };
+          };
+        };
+
+        # The same system but the slice allows to allocate memory
+        with-slice-non-crashing.configuration = {
+          imports = [ config.specialisation.with-slice.configuration ];
+          systemd.slices.testslice.sliceConfig.MemoryMax = lib.mkForce null;
+        };
+      };
     };
     other = { ... }: {
       users.mutableUsers = true;
@@ -27,12 +236,182 @@ import ./make-test-python.nix ({ pkgs, ...} : {
       set -o pipefail
       exec env -i "$@" | tee /dev/stderr
     '';
-  in ''
+  in /* python */ ''
+    def switch_to_specialisation(name, action="test"):
+        out = machine.succeed(f"${originalSystem}/specialisation/{name}/bin/switch-to-configuration {action} 2>&1")
+        assert_lacks(out, "switch-to-configuration line")  # Perl warnings
+        return out
+
+    def assert_contains(haystack, needle):
+        if needle not in haystack:
+            print("The haystack that will cause the following exception is:")
+            print("---")
+            print(haystack)
+            print("---")
+            raise Exception(f"Expected string '{needle}' was not found")
+
+    def assert_lacks(haystack, needle):
+        if needle in haystack:
+            print("The haystack that will cause the following exception is:")
+            print("---")
+            print(haystack, end="")
+            print("---")
+            raise Exception(f"Unexpected string '{needle}' was found")
+
+
     machine.succeed(
         "${stderrRunner} ${originalSystem}/bin/switch-to-configuration test"
     )
     machine.succeed(
         "${stderrRunner} ${otherSystem}/bin/switch-to-configuration test"
     )
+
+    with subtest("systemd sockets"):
+        machine.succeed("${originalSystem}/bin/switch-to-configuration test")
+
+        # Simple socket is created
+        out = switch_to_specialisation("simple-socket")
+        assert_lacks(out, "stopping the following units:")
+        # not checking for reload because dbus gets reloaded
+        assert_lacks(out, "restarting the following units:")
+        assert_lacks(out, "\nstarting the following units:")
+        assert_contains(out, "the following new units were started: socket-activated.socket\n")
+        assert_lacks(out, "as well:")
+        machine.succeed("[ $(stat -c%a /run/test.sock) = 777 ]")
+
+        # Changing the socket restarts it
+        out = switch_to_specialisation("modified-socket")
+        assert_lacks(out, "stopping the following units:")
+        #assert_lacks(out, "reloading the following units:")
+        assert_contains(out, "restarting the following units: socket-activated.socket\n")
+        assert_lacks(out, "\nstarting the following units:")
+        assert_lacks(out, "the following new units were started:")
+        assert_lacks(out, "as well:")
+        machine.succeed("[ $(stat -c%a /run/test.sock) = 666 ]")  # change was applied
+
+        # The unit is properly activated when the socket is accessed
+        if machine.succeed("socat - UNIX-CONNECT:/run/test.sock") != "hello":
+            raise Exception("Socket was not properly activated")
+
+        # Changing the socket restarts it and ignores the active service
+        out = switch_to_specialisation("simple-socket")
+        assert_contains(out, "stopping the following units: socket-activated.service\n")
+        assert_lacks(out, "reloading the following units:")
+        assert_contains(out, "restarting the following units: socket-activated.socket\n")
+        assert_lacks(out, "\nstarting the following units:")
+        assert_lacks(out, "the following new units were started:")
+        assert_lacks(out, "as well:")
+        machine.succeed("[ $(stat -c%a /run/test.sock) = 777 ]")  # change was applied
+
+        # Changing the service does nothing when the service is not active
+        out = switch_to_specialisation("modified-service")
+        assert_lacks(out, "stopping the following units:")
+        assert_lacks(out, "reloading the following units:")
+        assert_lacks(out, "restarting the following units:")
+        assert_lacks(out, "\nstarting the following units:")
+        assert_lacks(out, "the following new units were started:")
+        assert_lacks(out, "as well:")
+
+        # Activating the service and modifying it stops it but leaves the socket untouched
+        machine.succeed("socat - UNIX-CONNECT:/run/test.sock")
+        out = switch_to_specialisation("simple-socket")
+        assert_contains(out, "stopping the following units: socket-activated.service\n")
+        assert_lacks(out, "reloading the following units:")
+        assert_lacks(out, "restarting the following units:")
+        assert_lacks(out, "\nstarting the following units:")
+        assert_lacks(out, "the following new units were started:")
+        assert_lacks(out, "as well:")
+
+        # Activating the service and both the service and the socket stops the service and restarts the socket
+        machine.succeed("socat - UNIX-CONNECT:/run/test.sock")
+        out = switch_to_specialisation("modified-service-and-socket")
+        assert_contains(out, "stopping the following units: socket-activated.service\n")
+        assert_lacks(out, "reloading the following units:")
+        assert_contains(out, "restarting the following units: socket-activated.socket\n")
+        assert_lacks(out, "\nstarting the following units:")
+        assert_lacks(out, "the following new units were started:")
+        assert_lacks(out, "as well:")
+
+    with subtest("restart and reload by activation file"):
+        out = switch_to_specialisation("service-and-socket")
+        # Switch to a system where the example services get restarted
+        # by the activation script
+        out = switch_to_specialisation("restart-and-reload-by-activation-script")
+        assert_lacks(out, "stopping the following units:")
+        assert_contains(out, "stopping the following units as well: simple-service.service, socket-activated.service\n")
+        assert_contains(out, "reloading the following units: simple-reload-service.service\n")
+        assert_contains(out, "restarting the following units: simple-restart-service.service\n")
+        assert_contains(out, "\nstarting the following units: simple-service.service")
+
+        # The same, but in dry mode
+        switch_to_specialisation("service-and-socket")
+        out = switch_to_specialisation("restart-and-reload-by-activation-script", action="dry-activate")
+        assert_lacks(out, "would stop the following units:")
+        assert_contains(out, "would stop the following units as well: simple-service.service, socket-activated.service\n")
+        assert_contains(out, "would reload the following units: simple-reload-service.service\n")
+        assert_contains(out, "would restart the following units: simple-restart-service.service\n")
+        assert_contains(out, "\nwould start the following units: simple-service.service")
+
+    with subtest("mounts"):
+        switch_to_specialisation("with-mount")
+        out = machine.succeed("mount | grep 'on /testmount'")
+        assert_contains(out, "size=1024k")
+
+        out = switch_to_specialisation("with-mount-modified")
+        assert_lacks(out, "stopping the following units:")
+        assert_contains(out, "reloading the following units: testmount.mount\n")
+        assert_lacks(out, "restarting the following units:")
+        assert_lacks(out, "\nstarting the following units:")
+        assert_lacks(out, "the following new units were started:")
+        assert_lacks(out, "as well:")
+        # It changed
+        out = machine.succeed("mount | grep 'on /testmount'")
+        assert_contains(out, "size=10240k")
+
+    with subtest("timers"):
+        switch_to_specialisation("with-timer")
+        out = machine.succeed("systemctl show test-timer.timer")
+        assert_contains(out, "OnCalendar=2014-03-25 02:59:56 UTC")
+
+        out = switch_to_specialisation("with-timer-modified")
+        assert_lacks(out, "stopping the following units:")
+        assert_lacks(out, "reloading the following units:")
+        assert_contains(out, "restarting the following units: test-timer.timer\n")
+        assert_lacks(out, "\nstarting the following units:")
+        assert_lacks(out, "the following new units were started:")
+        assert_lacks(out, "as well:")
+        # It changed
+        out = machine.succeed("systemctl show test-timer.timer")
+        assert_contains(out, "OnCalendar=Fri 2012-11-23 16:00:00")
+
+    with subtest("paths"):
+        switch_to_specialisation("with-path")
+        machine.fail("test -f /testpath-modified")
+
+        # touch the file, unit should be triggered
+        machine.succeed("touch /testpath")
+        machine.wait_until_succeeds("test -f /testpath-modified")
+
+        machine.succeed("rm /testpath /testpath-modified")
+        switch_to_specialisation("with-path-modified")
+
+        machine.succeed("touch /testpath")
+        machine.fail("test -f /testpath-modified")
+        machine.succeed("touch /testpath2")
+        machine.wait_until_succeeds("test -f /testpath-modified")
+
+    # This test ensures that changes to slice configuration get applied.
+    # We test this by having a slice that allows no memory allocation at
+    # all and starting a service within it. If the service crashes, the slice
+    # is applied and if we modify the slice to allow memory allocation, the
+    # service should successfully start.
+    with subtest("slices"):
+        machine.succeed("echo 0 > /proc/sys/vm/panic_on_oom")  # allow OOMing
+        out = switch_to_specialisation("with-slice")
+        machine.fail("systemctl start testservice.service")
+        out = switch_to_specialisation("with-slice-non-crashing")
+        machine.succeed("systemctl start testservice.service")
+        machine.succeed("echo 1 > /proc/sys/vm/panic_on_oom")  # disallow OOMing
+
   '';
 })

third_party/nixpkgs/pkgs/applications/audio/mimic/default.nix

@@ -7,9 +7,9 @@ stdenv.mkDerivation rec {
   version = "1.3.0.1";
 
   src = fetchFromGitHub {
-    rev = version;
-    repo = "mimic1";
     owner = "MycroftAI";
+    repo = "mimic1";
+    rev = version;
     sha256 = "1agwgby9ql8r3x5rd1rgx3xp9y4cdg4pi3kqlz3vanv9na8nf3id";
   };
 

third_party/nixpkgs/pkgs/applications/audio/ncspot/default.nix

@@ -14,16 +14,16 @@ let
 in
 rustPlatform.buildRustPackage rec {
   pname = "ncspot";
-  version = "0.8.2";
+  version = "0.9.0";
 
   src = fetchFromGitHub {
     owner = "hrkfdn";
     repo = "ncspot";
     rev = "v${version}";
-    sha256 = "1rs1jy7zzfgqzr64ld8whn0wlw8n7rk1svxx0xfxm3ynmgc7sd68";
+    sha256 = "07qqs5q64zaxl3b2091vjihqb35fm0136cm4zibrgpx21akmbvr2";
   };
 
-  cargoSha256 = "10g7gdi1iz751wa60vr4fs0cvfsgs3pfcp8pnywicl0vsdp25fmc";
+  cargoSha256 = "0sdbba32f56z2q7kha5fxw2f00hikbz9sf4zl4wfl2i9b13j7mj0";
 
   cargoBuildFlags = [ "--no-default-features" "--features" "${lib.concatStringsSep "," features}" ];
 

third_party/nixpkgs/pkgs/applications/audio/pavucontrol/default.nix

@@ -1,26 +1,35 @@
-{ fetchurl, fetchpatch, lib, stdenv, pkg-config, intltool, libpulseaudio,
+{ fetchurl
-gtkmm3 , libcanberra-gtk3, gnome, wrapGAppsHook }:
+, fetchpatch
+, lib
+, stdenv
+, pkg-config
+, intltool
+, libpulseaudio
+, gtkmm3
+, libsigcxx
+, libcanberra-gtk3
+, json-glib
+, gnome
+, wrapGAppsHook
+}:
 
 stdenv.mkDerivation rec {
   pname = "pavucontrol";
-  version = "4.0";
+  version = "5.0";
 
   src = fetchurl {
     url = "https://freedesktop.org/software/pulseaudio/${pname}/${pname}-${version}.tar.xz";
-    sha256 = "1qhlkl3g8d7h72xjskii3g1l7la2cavwp69909pzmbi2jyn5pi4g";
+    sha256 = "sha256-zityw7XxpwrQ3xndgXUPlFW9IIcNHTo20gU2ry6PTno=";
   };
 
-  patches = [
+  buildInputs = [
-    # Can be removed with the next version bump
+    libpulseaudio
-    # https://gitlab.freedesktop.org/pulseaudio/pavucontrol/-/merge_requests/20
+    gtkmm3
-    (fetchpatch {
+    libsigcxx
-      name = "streamwidget-fix-drop-down-wayland.patch";
+    libcanberra-gtk3
-      url = "https://gitlab.freedesktop.org/pulseaudio/pavucontrol/-/commit/ae278b8643cf1089f66df18713c8154208d9a505.patch";
+    json-glib
-      sha256 = "066vhxjz6gmi2sp2n4pa1cdsxjnq6yml5js094g5n7ld34p84dpj";
+    gnome.adwaita-icon-theme
-  })];
+  ];
-
-  buildInputs = [ libpulseaudio gtkmm3 libcanberra-gtk3
-                  gnome.adwaita-icon-theme ];
 
   nativeBuildInputs = [ pkg-config intltool wrapGAppsHook ];
 

third_party/nixpkgs/pkgs/applications/audio/ptcollab/default.nix

@@ -13,13 +13,13 @@
 
 mkDerivation rec {
   pname = "ptcollab";
-  version = "0.4.3";
+  version = "0.5.0";
 
   src = fetchFromGitHub {
     owner = "yuxshao";
     repo = "ptcollab";
     rev = "v${version}";
-    sha256 = "sha256-bFFWPl7yaTwCKz7/f9Vk6mg0roUnig0dFERS4IE4R7g=";
+    sha256 = "sha256-sN3O8m+ib6Chb/RXTFbNWW6PnrolCHpmC/avRX93AH4=";
   };
 
   nativeBuildInputs = [ qmake pkg-config ];

third_party/nixpkgs/pkgs/applications/audio/reaper/default.nix

@@ -17,12 +17,14 @@
 
 stdenv.mkDerivation rec {
   pname = "reaper";
-  version = "6.29";
+  version = "6.38";
 
   src = fetchurl {
-    url = "https://www.reaper.fm/files/${lib.versions.major version}.x/reaper${builtins.replaceStrings ["."] [""] version}_linux_${stdenv.targetPlatform.qemuArch}.tar.xz";
+    url = "https://www.reaper.fm/files/${lib.versions.major version}.x/reaper${builtins.replaceStrings ["."] [""] version}_linux_${stdenv.hostPlatform.qemuArch}.tar.xz";
-    hash = if stdenv.isx86_64 then "sha256-DOul6J2Y7szy4+Q4SeO0uG6PSuU+MELE7ky8W3mSpTQ="
+    hash = {
-                              else "sha256-67iTi6bFlbQtyCjnPIjK8K/3aV+zaCsWBRCWmgYonM4=";
+      x86_64-linux = "sha256-K5EnrmzP8pyW9dR1fbMzkPzpS6aHm8JF1+m3afnH4rU=";
+      aarch64-linux = "sha256-6wNWDXjQNyfU2l9Xi9JtmAuoKtHuIY5cvNMjYkwh2Sk=";
+    }.${stdenv.hostPlatform.system};
   };
 
   nativeBuildInputs = [
@@ -76,6 +78,6 @@ stdenv.mkDerivation rec {
     homepage = "https://www.reaper.fm/";
     license = licenses.unfree;
     platforms = [ "x86_64-linux" "aarch64-linux" ];
-    maintainers = with maintainers; [ jfrankenau ilian ];
+    maintainers = with maintainers; [ jfrankenau ilian orivej ];
   };
 }

third_party/nixpkgs/pkgs/applications/audio/tonelib-gfx/default.nix

@@ -1,65 +1,58 @@
-{ stdenv
+{ lib
-, dpkg
+, stdenv
-, lib
-, autoPatchelfHook
 , fetchurl
-, gtk3
+, autoPatchelfHook
-, glib
+, dpkg
-, desktop-file-utils
 , alsa-lib
-, libjack2
-, harfbuzz
-, fribidi
-, pango
 , freetype
+, libglvnd
 , curl
+, libXcursor
+, libXinerama
+, libXrandr
+, libXrender
+, libjack2
 }:
 
 stdenv.mkDerivation rec {
   pname = "tonelib-gfx";
-  version = "4.6.6";
+  version = "4.7.0";
 
   src = fetchurl {
-    url = "https://www.tonelib.net/download/0509/ToneLib-GFX-amd64.deb";
+    url = "https://www.tonelib.net/download/0930/ToneLib-GFX-amd64.deb";
-    sha256 = "sha256-wdX3SQSr0IZHsTUl+1Y0iETme3gTyryexhZ/9XHkGeo=";
+    hash = "sha256-BcbX0dz94B4mj6QeQsnuZmwXAaXH+yJjnrUPgEYVqkU=";
   };
 
+  nativeBuildInputs = [ autoPatchelfHook dpkg ];
+
   buildInputs = [
-    dpkg
+    stdenv.cc.cc.lib
-    gtk3
-    glib
-    desktop-file-utils
     alsa-lib
-    libjack2
-    harfbuzz
-    fribidi
-    pango
     freetype
+    libglvnd
+  ] ++ runtimeDependencies;
+
+  runtimeDependencies = map lib.getLib [
+    curl
+    libXcursor
+    libXinerama
+    libXrandr
+    libXrender
+    libjack2
   ];
 
-  nativeBuildInputs = [
+  unpackCmd = "dpkg -x $curSrc source";
-    autoPatchelfHook
-  ];
-
-  unpackPhase = ''
-    mkdir -p $TMP/ $out/
-    dpkg -x $src $TMP
-  '';
 
   installPhase = ''
-    cp -R $TMP/usr/* $out/
+    mv usr $out
-    mv $out/bin/ToneLib-GFX $out/bin/tonelib-gfx
+    substituteInPlace $out/share/applications/ToneLib-GFX.desktop --replace /usr/ $out/
  '';
 
-  runtimeDependencies = [
-    (lib.getLib curl)
-  ];
-
   meta = with lib; {
     description = "Tonelib GFX is an amp and effects modeling software for electric guitar and bass.";
     homepage = "https://tonelib.net/";
     license = licenses.unfree;
-    maintainers = with maintainers; [ dan4ik605743 ];
+    maintainers = with maintainers; [ dan4ik605743 orivej ];
-    platforms = platforms.linux;
+    platforms = [ "x86_64-linux" ];
   };
 }

third_party/nixpkgs/pkgs/applications/blockchains/electrs/default.nix

@@ -9,16 +9,16 @@
 
 rustPlatform.buildRustPackage rec {
   pname = "electrs";
-  version = "0.9.0";
+  version = "0.9.1";
 
   src = fetchFromGitHub {
     owner = "romanz";
     repo = pname;
     rev = "v${version}";
-    sha256 = "04dqbn2nfzllxfcn3v9vkfy2hn2syihijr575621r1pj65pcgf8y";
+    hash = "sha256-GDO8iGntQncvdJiDMBJk9GrGF9JToasbLRzju3S0TS0=";
   };
 
-  cargoSha256 = "0hl8q62lankrab8gq9vxmkn68drs0hw5pk0q6aiq8fxsb63dzsw0";
+  cargoHash = "sha256-Ms785+3Z4xEUW8FRRu1FIHk7HSWYLBThKlJDFjW6j0I=";
 
   # needed for librocksdb-sys
   nativeBuildInputs = [ llvmPackages.clang ];

third_party/nixpkgs/pkgs/applications/blockchains/electrs/update.sh

@@ -0,0 +1,39 @@
+#!/usr/bin/env nix-shell
+#!nix-shell -i bash -p coreutils curl jq git gnupg common-updater-scripts
+set -euo pipefail
+
+# Fetch latest release, GPG-verify the tag, update derivation
+
+scriptDir=$(cd "${BASH_SOURCE[0]%/*}" && pwd)
+nixpkgs=$(realpath "$scriptDir"/../../../..)
+
+oldVersion=$(nix-instantiate --eval -E "(import \"$nixpkgs\" { config = {}; overlays = []; }).electrs.version" | tr -d '"')
+version=$(curl -s --show-error "https://api.github.com/repos/romanz/electrs/releases/latest" | jq -r '.tag_name' | tail -c +2)
+
+if [[ $version == $oldVersion ]]; then
+  echo "Already at latest version $version"
+  exit 0
+fi
+echo "New version: $version"
+
+tmpdir=$(mktemp -d /tmp/electrs-verify-gpg.XXX)
+repo=$tmpdir/repo
+trap "rm -rf $tmpdir" EXIT
+
+git clone --depth 1 --branch v${version} -c advice.detachedHead=false https://github.com/romanz/electrs $repo
+
+export GNUPGHOME=$tmpdir
+echo
+echo "Fetching romanz's key"
+gpg --keyserver hkps://keys.openpgp.org --recv-keys 15c8c3574ae4f1e25f3f35c587cae5fa46917cbb 2> /dev/null
+echo
+echo "Verifying commit"
+git -C $repo verify-tag v${version}
+
+rm -rf $repo/.git
+hash=$(nix hash path $repo)
+
+(cd "$nixpkgs" && update-source-version electrs "$version" "$hash")
+sed -i 's|cargoHash = .*|cargoHash = "sha256-AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=";|' "$scriptDir/default.nix"
+echo
+echo "electrs: $oldVersion -> $version"

third_party/nixpkgs/pkgs/applications/blockchains/wasabiwallet/default.nix

@@ -2,7 +2,7 @@
 , fetchurl
 , makeDesktopItem
 , curl
-, dotnet-netcore
+, dotnetCorePackages
 , fontconfig
 , krb5
 , openssl
@@ -11,9 +11,10 @@
 }:
 
 let
+  dotnet-runtime = dotnetCorePackages.runtime_5_0;
   libPath = lib.makeLibraryPath [
     curl
-    dotnet-netcore
+    dotnet-runtime
     fontconfig.lib
     krb5
     openssl

third_party/nixpkgs/pkgs/applications/editors/android-studio/common.nix

@@ -214,9 +214,9 @@ in runCommand
       # source-code itself).
       platforms = [ "x86_64-linux" ];
       maintainers = with maintainers; rec {
-        stable = [ meutraa ];
+        stable = [ meutraa fabianhjr ];
-        beta = [ meutraa ];
+        beta = [ meutraa fabianhjr ];
-        canary = [ meutraa ];
+        canary = [ meutraa fabianhjr ];
         dev = canary;
       }."${channel}";
     };

third_party/nixpkgs/pkgs/applications/editors/android-studio/default.nix

@@ -9,8 +9,8 @@ let
     inherit buildFHSUserEnv;
   };
   stableVersion = {
-    version = "2020.3.1.24"; # "Android Studio Arctic Fox (2020.3.1)"
+    version = "2020.3.1.25"; # "Android Studio Arctic Fox (2020.3.1)"
-    sha256Hash = "0k8jcq8vpjayvwm9wqcrjhnp7dly0h4bb8nxspck5zmi8q2ar67l";
+    sha256Hash = "10gpwb130bzp6a9g958cjqcb2gsm0vdgm08nm5xy45xdh54nxjfg";
   };
   betaVersion = {
     version = "2021.1.1.14"; # "Android Studio Bumblebee (2021.1.1) Beta 1"

third_party/nixpkgs/pkgs/applications/editors/jetbrains/default.nix

@@ -242,12 +242,12 @@ in
 
   clion = buildClion rec {
     name = "clion-${version}";
-    version = "2021.2.1"; /* updated by script */
+    version = "2021.2.3"; /* updated by script */
     description  = "C/C++ IDE. New. Intelligent. Cross-platform";
     license = lib.licenses.unfree;
     src = fetchurl {
       url = "https://download.jetbrains.com/cpp/CLion-${version}.tar.gz";
-      sha256 = "0knl0ca15cj0nggyfhd7s0szxr2vp7xvvp3nna3mplssfn59zf9d"; /* updated by script */
+      sha256 = "09qbzkxyk435s4n04s12ncjyri024wj9pwz8wgjjsswpfa69dhr5"; /* updated by script */
     };
     wmClass = "jetbrains-clion";
     update-channel = "CLion RELEASE"; # channel's id as in http://www.jetbrains.com/updates/updates.xml
@@ -255,12 +255,12 @@ in
 
   datagrip = buildDataGrip rec {
     name = "datagrip-${version}";
-    version = "2021.2.2"; /* updated by script */
+    version = "2021.2.4"; /* updated by script */
     description = "Your Swiss Army Knife for Databases and SQL";
     license = lib.licenses.unfree;
     src = fetchurl {
       url = "https://download.jetbrains.com/datagrip/${name}.tar.gz";
-      sha256 = "18dammsvd43x8cx0plzwgankmzfv7j79z0nsdagd540v99c2r2v3"; /* updated by script */
+      sha256 = "1vj9ihzw07bh30ngy8mj027ljq9zzd904k61f8jbfpw75vknh8f6"; /* updated by script */
     };
     wmClass = "jetbrains-datagrip";
     update-channel = "DataGrip RELEASE";
@@ -268,12 +268,12 @@ in
 
   goland = buildGoland rec {
     name = "goland-${version}";
-    version = "2021.2.2"; /* updated by script */
+    version = "2021.2.3"; /* updated by script */
     description = "Up and Coming Go IDE";
     license = lib.licenses.unfree;
     src = fetchurl {
       url = "https://download.jetbrains.com/go/${name}.tar.gz";
-      sha256 = "0ayqvyd24klafm09kls4fdp2acqsvh0zhm4wsrmrshlpmdqd5vjk"; /* updated by script */
+      sha256 = "1n0yrk05xv4pard82b6z349ksiw8k75s9525pnpa2ny1ay1klhdg"; /* updated by script */
     };
     wmClass = "jetbrains-goland";
     update-channel = "GoLand RELEASE";
@@ -281,12 +281,12 @@ in
 
   idea-community = buildIdea rec {
     name = "idea-community-${version}";
-    version = "2021.2.1"; /* updated by script */
+    version = "2021.2.3"; /* updated by script */
     description = "Integrated Development Environment (IDE) by Jetbrains, community edition";
     license = lib.licenses.asl20;
     src = fetchurl {
       url = "https://download.jetbrains.com/idea/ideaIC-${version}.tar.gz";
-      sha256 = "1af43c51ryvqc7c9r3kz2266j0nvz50xw1vhfjbd74c3ycj8a1zz"; /* updated by script */
+      sha256 = "166rhssyizn40rlar7ym7gkwz2aawp58qqvrs60w3cwwvjvb0bjq"; /* updated by script */
     };
     wmClass = "jetbrains-idea-ce";
     update-channel = "IntelliJ IDEA RELEASE";
@@ -294,12 +294,12 @@ in
 
   idea-ultimate = buildIdea rec {
     name = "idea-ultimate-${version}";
-    version = "2021.2.1"; /* updated by script */
+    version = "2021.2.3"; /* updated by script */
     description = "Integrated Development Environment (IDE) by Jetbrains, requires paid license";
     license = lib.licenses.unfree;
     src = fetchurl {
       url = "https://download.jetbrains.com/idea/ideaIU-${version}-no-jbr.tar.gz";
-      sha256 = "1257a9d9h3ybdsnm74jmgzp1rfi1629gv9kr0w2nhmxj7ghhbx4w"; /* updated by script */
+      sha256 = "1d0kk2yydrbzvdy6dy9jqr182panidmbf2hy80gvi5ph2r5rv1qd"; /* updated by script */
     };
     wmClass = "jetbrains-idea";
     update-channel = "IntelliJ IDEA RELEASE";
@@ -307,13 +307,13 @@ in
 
   mps = buildMps rec {
     name = "mps-${version}";
-    version = "2021.1.3"; /* updated by script */
+    version = "2021.2.1"; /* updated by script */
-    versionMajorMinor = "2021.1"; /* updated by script */
+    versionMajorMinor = "2021.2"; /* updated by script */
     description = "Create your own domain-specific language";
     license = lib.licenses.asl20;
     src = fetchurl {
       url = "https://download.jetbrains.com/mps/${versionMajorMinor}/MPS-${version}.tar.gz";
-      sha256 = "0w1nchaa2d3z3mdp43mvifnbibl1ribyc98dm7grnwvrqk72pabf"; /* updated by script */
+      sha256 = "1yawjc5xwga1mmlsl3068ml532941mq08i9ji3dhj1nwdkyav2jz"; /* updated by script */
     };
     wmClass = "jetbrains-mps";
     update-channel = "MPS RELEASE";
@@ -321,12 +321,12 @@ in
 
   phpstorm = buildPhpStorm rec {
     name = "phpstorm-${version}";
-    version = "2021.2.1"; /* updated by script */
+    version = "2021.2.3"; /* updated by script */
     description = "Professional IDE for Web and PHP developers";
     license = lib.licenses.unfree;
     src = fetchurl {
       url = "https://download.jetbrains.com/webide/PhpStorm-${version}.tar.gz";
-      sha256 = "1iqnq38d71wbl1iqhqr5as1802s53m3220vq4g42mdjgdj296bdk"; /* updated by script */
+      sha256 = "1avcm4fnkn0jkw85s505yz5kjbxzk038463sjdsca04pv5yhsdp0"; /* updated by script */
     };
     wmClass = "jetbrains-phpstorm";
     update-channel = "PhpStorm RELEASE";
@@ -334,12 +334,12 @@ in
 
   pycharm-community = buildPycharm rec {
     name = "pycharm-community-${version}";
-    version = "2021.2.1"; /* updated by script */
+    version = "2021.2.2"; /* updated by script */
     description = "PyCharm Community Edition";
     license = lib.licenses.asl20;
     src = fetchurl {
       url = "https://download.jetbrains.com/python/${name}.tar.gz";
-      sha256 = "1z59yvk3wrqn0c9581vvv62wxf4fyybha426ipyqml8c405z27y4"; /* updated by script */
+      sha256 = "0s9kk3n5ac6lvqi2yw9gvvm45865jchiwyrs8pq2dgdkgaligrjv"; /* updated by script */
     };
     wmClass = "jetbrains-pycharm-ce";
     update-channel = "PyCharm RELEASE";
@@ -347,12 +347,12 @@ in
 
   pycharm-professional = buildPycharm rec {
     name = "pycharm-professional-${version}";
-    version = "2021.2.1"; /* updated by script */
+    version = "2021.2.2"; /* updated by script */
     description = "PyCharm Professional Edition";
     license = lib.licenses.unfree;
     src = fetchurl {
       url = "https://download.jetbrains.com/python/${name}.tar.gz";
-      sha256 = "0sh9kdr53dhhq171p9lmsvci3qzlds4vzyqx12mzfvfs7svri1w2"; /* updated by script */
+      sha256 = "0mgmmf926n3ipr8fxn6f9hsa5vkil8yrw5qlixi8nwnx7chmkp56"; /* updated by script */
     };
     wmClass = "jetbrains-pycharm";
     update-channel = "PyCharm RELEASE";
@@ -360,12 +360,12 @@ in
 
   rider = buildRider rec {
     name = "rider-${version}";
-    version = "2021.2.1"; /* updated by script */
+    version = "2021.2.2"; /* updated by script */
     description = "A cross-platform .NET IDE based on the IntelliJ platform and ReSharper";
     license = lib.licenses.unfree;
     src = fetchurl {
       url = "https://download.jetbrains.com/rider/JetBrains.Rider-${version}.tar.gz";
-      sha256 = "1b5ih6q8kyds8px7gldfz1m9ap3kk27yswwxy1735c83094l2nlm"; /* updated by script */
+      sha256 = "17xx8mz3dr5iqlr0lsiy8a6cxz3wp5vg8z955cdv0hf8b5rncqfa"; /* updated by script */
     };
     wmClass = "jetbrains-rider";
     update-channel = "Rider RELEASE";
@@ -373,12 +373,12 @@ in
 
   ruby-mine = buildRubyMine rec {
     name = "ruby-mine-${version}";
-    version = "2021.2.1"; /* updated by script */
+    version = "2021.2.3"; /* updated by script */
     description = "The Most Intelligent Ruby and Rails IDE";
     license = lib.licenses.unfree;
     src = fetchurl {
       url = "https://download.jetbrains.com/ruby/RubyMine-${version}.tar.gz";
-      sha256 = "09blnm6han2rmdvjbr1va081zndzvjr1i0m3njaiwcb9rf2axm32"; /* updated by script */
+      sha256 = "0bbq5ya1dxrgaqqqsc4in4rgv7v292hww3bb0vpzwz6dmc2jly1i"; /* updated by script */
     };
     wmClass = "jetbrains-rubymine";
     update-channel = "RubyMine RELEASE";
@@ -386,12 +386,12 @@ in
 
   webstorm = buildWebStorm rec {
     name = "webstorm-${version}";
-    version = "2021.2.1"; /* updated by script */
+    version = "2021.2.2"; /* updated by script */
     description = "Professional IDE for Web and JavaScript development";
     license = lib.licenses.unfree;
     src = fetchurl {
       url = "https://download.jetbrains.com/webstorm/WebStorm-${version}.tar.gz";
-      sha256 = "12i9f5sw02gcgviflfs6gwmnxvzhgmm4v4447am0syl4nq8nyv1s"; /* updated by script */
+      sha256 = "1a3vlqza9nbc4a2qxrzdckmq003zx1db9dy7wx462amc8sbh6v92"; /* updated by script */
     };
     wmClass = "jetbrains-webstorm";
     update-channel = "WebStorm RELEASE";

third_party/nixpkgs/pkgs/applications/editors/rstudio/default.nix

@@ -42,7 +42,7 @@ let
   src = fetchFromGitHub {
     owner = "rstudio";
     repo = "rstudio";
-    rev = version;
+    rev = "v${version}";
     sha256 = "sha256-9c1bNsf8kJjpcZ2cMV/pPNtXQkFOntX29a1cdnXpllE=";
   };
 

third_party/nixpkgs/pkgs/applications/editors/vscode/vscode.nix

@@ -14,17 +14,17 @@ let
   archive_fmt = if stdenv.isDarwin then "zip" else "tar.gz";
 
   sha256 = {
-    x86_64-linux = "069jdwqs9z2z95mjs9nx58rp1516dyyqn5bc0vgr7xvlbis97lq0";
+    x86_64-linux = "1yfaf9qdaf6njvj8kilmivyl0nnhdvd9hbzpf8hv3kw5rfpdvy89";
-    x86_64-darwin = "1bd32dkpyfgknxqn76jcwpa47rac9q14glbf5sb1rh9rfav0m1m8";
+    x86_64-darwin = "10rx5aif61xipf5lcjzkidz9dhbm5gc2wf87c2j456nixaxbx0b4";
-    aarch64-linux = "1axxnys3pd2qrvj6mqpa5cih44b4dbpgi8mvn616d8d45jgdnc1r";
+    aarch64-linux = "13h4ffdm9y9p3jnqcjvapykbm73bkjy5jaqwhsi293f9r7jfp9rf";
-    aarch64-darwin = "0bdp0k20lfwpsl1a3dz6c97s0b5bp3rhb66jwgbyyc16zrz79r1z";
+    aarch64-darwin = "07nmrxc25rfp5ibarhg3c14ksk2ymqmsnc55hicvvhw93g2qczby";
-    armv7l-linux = "077w5hvc4brb56zs0w37nr4a8vlcij5z3yrv3rz16p58nnkj56hs";
+    armv7l-linux = "1gz1mmw2vp986l9sm7rd6hypxs70sz63sbmzyxwfqpvj973dl23q";
   }.${system};
 in
   callPackage ./generic.nix rec {
     # Please backport all compatible updates to the stable release.
     # This is important for the extension ecosystem.
-    version = "1.61.1";
+    version = "1.61.2";
     pname = "vscode";
 
     executableName = "code" + lib.optionalString isInsiders "-insiders";

third_party/nixpkgs/pkgs/applications/editors/vscode/vscodium.nix

@@ -13,10 +13,10 @@ let
   archive_fmt = if system == "x86_64-darwin" then "zip" else "tar.gz";
 
   sha256 = {
-    x86_64-linux = "0ic7h5aq1lyplk01bydqwrvz40h59sf0n0q4gxj844k4qidy14md";
+    x86_64-linux = "1q260kjhyx8djl82275ii63z1mzypsz7rkz3pj1n2wjkwsnw276x";
-    x86_64-darwin = "15s3vj7740ksb82gdjqpxw6cyd45ymdpacamkqk800929cv715qs";
+    x86_64-darwin = "1scx155rm8j6dwn0i31b6ajsdxcn1n24p3k6dx248w0zyiwd5wm1";
-    aarch64-linux = "0n3bxggfzlr1cqarq861yfqka3qfgpwvk8j22l7dv4vki06f8jzy";
+    aarch64-linux = "1j788a0p767i65ying9pfg6rss8l7g76n2323dnmj12bhxs6cqd1";
-    armv7l-linux = "0jksfdals8xf3vh5hqrd40pj5qn8byjrakjnrv926qznxjj152bn";
+    armv7l-linux = "1yfwmfxpilfv2h3pp698pg4wr6dnyzwg0r266xiwsw7z38jh54fk";
   }.${system};
 
   sourceRoot = {
@@ -31,7 +31,7 @@ in
 
     # Please backport all compatible updates to the stable release.
     # This is important for the extension ecosystem.
-    version = "1.61.1";
+    version = "1.61.2";
     pname = "vscodium";
 
     executableName = "codium";

third_party/nixpkgs/pkgs/applications/graphics/epick/default.nix

@@ -0,0 +1,56 @@
+{ lib
+, rustPlatform
+, fetchFromGitHub
+, stdenv
+, python3
+, libGL
+, libX11
+, libXcursor
+, libXi
+, libXrandr
+, libxcb
+, libxkbcommon
+, AppKit
+, IOKit
+}:
+
+rustPlatform.buildRustPackage rec {
+  pname = "epick";
+  version = "0.5.1";
+
+  src = fetchFromGitHub {
+    owner = "vv9k";
+    repo = pname;
+    rev = version;
+    sha256 = "0l7m45bqx62nrwi0r4pdwxcq37s7h3nnawk9nq2zpvl9wcgnx3gc";
+  };
+
+  cargoSha256 = "sha256-LERV3+zwt5oVfyueGfxM7HsOha4cuWTkPyvPQwHSZqo=";
+
+  nativeBuildInputs = lib.optional stdenv.isLinux python3;
+
+  buildInputs = lib.optionals stdenv.isLinux [
+    libGL
+    libX11
+    libXcursor
+    libXi
+    libXrandr
+    libxcb
+    libxkbcommon
+  ] ++ lib.optionals stdenv.isDarwin [
+    AppKit
+    IOKit
+  ];
+
+  postFixup = lib.optionalString stdenv.isLinux ''
+    patchelf --set-rpath ${lib.makeLibraryPath buildInputs} $out/bin/epick
+  '';
+
+  meta = with lib; {
+    description = "Simple color picker that lets the user create harmonic palettes with ease";
+    homepage = "https://github.com/vv9k/epick";
+    changelog = "https://github.com/vv9k/epick/blob/${version}/CHANGELOG.md";
+    license = licenses.gpl3Only;
+    maintainers = with maintainers; [ figsoda ];
+  };
+}

third_party/nixpkgs/pkgs/applications/graphics/image-roll/default.nix

@@ -0,0 +1,33 @@
+{ lib
+, rustPlatform
+, fetchFromGitHub
+, glib
+, pkg-config
+, wrapGAppsHook
+, gtk3
+}:
+
+rustPlatform.buildRustPackage rec {
+  pname = "image-roll";
+  version = "1.3.1";
+
+  src = fetchFromGitHub {
+    owner = "weclaw1";
+    repo = pname;
+    rev = version;
+    sha256 = "007jzmrn4cnqbi6fy5lxanbwa4pc72fbcv9irk3pfd0wspp05s8j";
+  };
+
+  cargoSha256 = "sha256-dRRBfdGTXtoNbp7OWqOdNECXHCpj0ipkCOvcdekW+G4=";
+
+  nativeBuildInputs = [ glib pkg-config wrapGAppsHook ];
+
+  buildInputs = [ gtk3 ];
+
+  meta = with lib; {
+    description = "Simple and fast GTK image viewer with basic image manipulation tools";
+    homepage = "https://github.com/weclaw1/image-roll";
+    license = licenses.mit;
+    maintainers = with maintainers; [ figsoda ];
+  };
+}

third_party/nixpkgs/pkgs/applications/graphics/ipe/default.nix

@@ -1,7 +1,9 @@
 { lib
 , mkDerivation
+, makeDesktopItem
 , fetchurl
 , pkg-config
+, copyDesktopItems
 , cairo
 , freetype
 , ghostscript
@@ -26,7 +28,7 @@ mkDerivation rec {
 
   sourceRoot = "${pname}-${version}/src";
 
-  nativeBuildInputs = [ pkg-config ];
+  nativeBuildInputs = [ pkg-config copyDesktopItems ];
 
   buildInputs = [
     cairo
@@ -46,11 +48,31 @@ mkDerivation rec {
   URWFONTDIR = "${texlive}/texmf-dist/fonts/type1/urw/";
   LUA_PACKAGE = "lua";
 
-  qtWrapperArgs = [ "--prefix PATH : ${texlive}/bin"  ];
+  qtWrapperArgs = [ "--prefix PATH : ${lib.makeBinPath [ texlive ]}" ];
 
   enableParallelBuilding = true;
 
-  # TODO: make .desktop entry
+  desktopItems = [
+    (makeDesktopItem {
+      name = pname;
+      desktopName = "Ipe";
+      genericName = "Drawing editor";
+      comment = "A drawing editor for creating figures in PDF format";
+      exec = "ipe";
+      icon = "ipe";
+      mimeType = "text/xml;application/pdf";
+      categories = "Graphics;Qt;";
+      extraDesktopEntries = {
+        StartupWMClass = "ipe";
+        StartupNotify = "true";
+      };
+    })
+  ];
+
+  postInstall = ''
+    mkdir -p $out/share/icons/hicolor/128x128/apps
+    ln -s $out/share/ipe/${version}/icons/icon_128x128.png $out/share/icons/hicolor/128x128/apps/ipe.png
+  '';
 
   meta = with lib; {
     description = "An editor for drawing figures";

third_party/nixpkgs/pkgs/applications/misc/1password/default.nix

@@ -2,23 +2,26 @@
 
 stdenv.mkDerivation rec {
   pname = "1password";
-  version = "1.11.2";
+  version = "1.12.2";
   src =
-    if stdenv.isLinux then fetchzip {
+    if stdenv.isLinux then
+      fetchzip
+        {
           url = {
             "i686-linux" = "https://cache.agilebits.com/dist/1P/op/pkg/v${version}/op_linux_386_v${version}.zip";
             "x86_64-linux" = "https://cache.agilebits.com/dist/1P/op/pkg/v${version}/op_linux_amd64_v${version}.zip";
             "aarch64-linux" = "https://cache.agilebits.com/dist/1P/op/pkg/v${version}/op_linux_arm_v${version}.zip";
           }.${stdenv.hostPlatform.system};
           sha256 = {
-        "i686-linux" = "0rh5bakj9qd43cf6wj5v46a3h98kcwqyc0f1yw72wvcacvjycyjz";
+            "i686-linux" = "tCm/vDBASPN9FBSVRJ6BrFc7hdtZWPEAgvokJhjazPg=";
-        "x86_64-linux" = "00nf0cb8cxk1pvzr1wq778wvikzrlzy38r3rzkq44whdpdj50jzx";
+            "x86_64-linux" = "3VkVMuTAfeEowkguJi2fd1kG7GwO1VN5GBPgNaH3Zv4=";
-        "aarch64-linux" = "1gv282z49bj3ln5na4wb1z5455a64cyd54fp5i96k8shaxd0apxf";
+            "aarch64-linux" = "vWoA/0ZfdwVniHmxC4nH1QIc6bjdb00+SwlkIWc9BPs=";
           }.${stdenv.hostPlatform.system};
           stripRoot = false;
-    } else fetchurl {
+        } else
+      fetchurl {
         url = "https://cache.agilebits.com/dist/1P/op/pkg/v${version}/op_apple_universal_v${version}.pkg";
-      sha256 = "1pqdjr6d23j9fpwgahb0s1ni1bpjv9jajs1hapgq5kdrww2w7nhm";
+        sha256 = "xG/6YZdkJxr5Py90rkIyG4mK40yFTmNSfih9jO2uF+4=";
       };
 
   buildInputs = lib.optionals stdenv.isDarwin [ xar cpio ];

third_party/nixpkgs/pkgs/applications/misc/authy/default.nix

@@ -11,8 +11,8 @@ in
 
 stdenv.mkDerivation rec {
   pname = "authy";
-  version = "1.8.4";
+  version = "1.9.0";
-  rev = "6";
+  rev = "7";
 
   buildInputs = [
     alsa-lib
@@ -50,7 +50,7 @@ stdenv.mkDerivation rec {
 
   src = fetchurl {
     url = "https://api.snapcraft.io/api/v1/snaps/download/H8ZpNgIoPyvmkgxOWw5MSzsXK1wRZiHn_${rev}.snap";
-    sha256 = "07h4mgp229nlvw9ifiiyzph26aa61w4x4f1xya8vw580blrk1ph9";
+    sha256 = "10az47cc3lgsdi0ixmmna08nqf9xm7gsl1ph00wfwrxzsi05ygx3";
   };
 
   nativeBuildInputs = [ autoPatchelfHook makeWrapper squashfsTools ];

third_party/nixpkgs/pkgs/applications/misc/calibre/default.nix

@@ -1,6 +1,7 @@
 { lib
 , mkDerivation
 , fetchurl
+, fetchpatch
 , poppler_utils
 , pkg-config
 , libpng
@@ -26,18 +27,21 @@
 
 mkDerivation rec {
   pname = "calibre";
-  version = "5.24.0";
+  version = "5.29.0";
 
   src = fetchurl {
     url = "https://download.calibre-ebook.com/${version}/${pname}-${version}.tar.xz";
-    hash = "sha256:18dr577nv7ijw3ar6mrk2xrc54mlrqkaj5jrc6s5sirl0710fdfg";
+    sha256 = "sha256-9ymHEpTHDUM3NAGoeSETzKRLKgJLRY4eEli6N5lbZug=";
   };
 
+  # https://sources.debian.org/patches/calibre/5.29.0+dfsg-1
   patches = [
-    # Plugin installation (very insecure) disabled (from Debian)
+    #  allow for plugin update check, but no calibre version check
-    ./disable_plugins.patch
+    (fetchpatch {
-    # Automatic version update disabled by default (from Debian)
+      name = "0001_only_plugin_update.patch";
-    ./no_updates_dialog.patch
+      url = "https://sources.debian.org/data/main/c/calibre/5.29.0%2Bdfsg-1/debian/patches/0001-only-plugin-update.patch";
+      sha256 = "sha256-aGT8rJ/eQKAkmyHBWdY0ouZuWvDwtLVJU5xY6d3hY3k=";
+    })
   ]
   ++ lib.optional (!unrarSupport) ./dont_build_unrar_plugin.patch;
 

third_party/nixpkgs/pkgs/applications/misc/calibre/disable_plugins.patch

@@ -1,17 +0,0 @@
-Description: Disable plugin dialog. It uses a totally non-authenticated and non-trusted way of installing arbitrary code.
-Author: Martin Pitt <mpitt@debian.org>
-Bug-Debian: http://bugs.debian.org/640026
-
-Index: calibre-0.8.29+dfsg/src/calibre/gui2/actions/preferences.py
-===================================================================
---- calibre-0.8.29+dfsg.orig/src/calibre/gui2/actions/preferences.py	2011-12-16 05:49:14.000000000 +0100
-+++ calibre-0.8.29+dfsg/src/calibre/gui2/actions/preferences.py	2011-12-20 19:29:04.798468930 +0100
-@@ -28,8 +28,6 @@
-             pm.addAction(QIcon(I('config.png')), _('Preferences'), self.do_config)
-         cm('welcome wizard', _('Run welcome wizard'),
-                 icon='wizard.png', triggered=self.gui.run_wizard)
--        cm('plugin updater', _('Get plugins to enhance calibre'),
--                icon='plugins/plugin_updater.png', triggered=self.get_plugins)
-         if not DEBUG:
-             pm.addSeparator()
-             cm('restart', _('Restart in debug mode'), icon='debug.png',

third_party/nixpkgs/pkgs/applications/misc/calibre/no_updates_dialog.patch

@@ -1,15 +0,0 @@
-diff -burN calibre-2.9.0.orig/src/calibre/gui2/main.py calibre-2.9.0/src/calibre/gui2/main.py
---- calibre-2.9.0.orig/src/calibre/gui2/main.py	2014-11-09 20:09:54.081231882 +0800
-+++ calibre-2.9.0/src/calibre/gui2/main.py	2014-11-09 20:15:48.193033844 +0800
-@@ -37,8 +37,9 @@
-                       help=_('Start minimized to system tray.'))
-     parser.add_option('-v', '--verbose', default=0, action='count',
-                       help=_('Ignored, do not use. Present only for legacy reasons'))
--    parser.add_option('--no-update-check', default=False, action='store_true',
--            help=_('Do not check for updates'))
-+    parser.add_option('--update-check', dest='no_update_check', default=True,
-+            action='store_false',
-+            help=_('Check for updates'))
-     parser.add_option('--ignore-plugins', default=False, action='store_true',
-             help=_('Ignore custom plugins, useful if you installed a plugin'
-                 ' that is preventing calibre from starting'))

third_party/nixpkgs/pkgs/applications/misc/dbeaver/default.nix

@@ -18,13 +18,13 @@
 
 stdenv.mkDerivation rec {
   pname = "dbeaver";
-  version = "21.2.2"; # When updating also update fetchedMavenDeps.sha256
+  version = "21.2.3"; # When updating also update fetchedMavenDeps.sha256
 
   src = fetchFromGitHub {
     owner = "dbeaver";
     repo = "dbeaver";
     rev = version;
-    sha256 = "6FQd7UGX19Ez/updybia/tzl+9GYyPPzPGFsV67Enq0=";
+    sha256 = "0xu/uMMloCUuhKs392kn6qJzlobDNuvwlHGdS/gGAB8=";
   };
 
   fetchedMavenDeps = stdenv.mkDerivation {
@@ -50,7 +50,7 @@ stdenv.mkDerivation rec {
     dontFixup = true;
     outputHashAlgo = "sha256";
     outputHashMode = "recursive";
-    outputHash = "VHOIK6sOAP+O9HicUiE2avLcppRzocPUf1XIcyuGw30=";
+    outputHash = "7Sm1hAoi5xc4MLONOD8ySLLkpao0qmlMRRva/8zR210=";
   };
 
   nativeBuildInputs = [

third_party/nixpkgs/pkgs/applications/misc/fuzzel/default.nix

@@ -13,29 +13,24 @@
 , tllist
 , fcft
 , enableCairo ? true
-, enablePNG ? true
+, withPNGBackend ? "libpng"
-, enableSVG ? true
+, withSVGBackend ? "librsvg"
 # Optional dependencies
 , cairo
 , librsvg
 , libpng
 }:
 
-let
-  # Courtesy of sternenseemann and FRidh, commit c9a7fdfcfb420be8e0179214d0d91a34f5974c54
-  mesonFeatureFlag = opt: b: "-D${opt}=${if b then "enabled" else "disabled"}";
-in
-
 stdenv.mkDerivation rec {
   pname = "fuzzel";
-  version = "1.6.1";
+  version = "1.6.4";
 
   src = fetchFromGitea {
     domain = "codeberg.org";
     owner = "dnkl";
     repo = "fuzzel";
     rev = version;
-    sha256 = "sha256-JW5sAlTprSRIdFbmSaUreGtNccERgQMGEW+WCSscYQk=";
+    sha256 = "sha256-wl3dO6EwLXWf0XtAIml1NlNRIvpIQJuq1pxLmo/pAUE=";
   };
 
   nativeBuildInputs = [
@@ -54,15 +49,15 @@ stdenv.mkDerivation rec {
     tllist
     fcft
   ] ++ lib.optional enableCairo cairo
-    ++ lib.optional enablePNG libpng
+    ++ lib.optional (withPNGBackend == "libpng") libpng
-    ++ lib.optional enableSVG librsvg;
+    ++ lib.optional (withSVGBackend == "librsvg") librsvg;
 
   mesonBuildType = "release";
 
   mesonFlags = [
-    (mesonFeatureFlag "enable-cairo" enableCairo)
+    "-Denable-cairo=${if enableCairo then "enabled" else "disabled"}"
-    (mesonFeatureFlag "enable-png" enablePNG)
+    "-Dpng-backend=${withPNGBackend}"
-    (mesonFeatureFlag "enable-svg" enableSVG)
+    "-Dsvg-backend=${withSVGBackend}"
   ];
 
   meta = with lib; {

third_party/nixpkgs/pkgs/applications/misc/logseq/default.nix

@@ -1,12 +1,12 @@
-{ lib, stdenv, fetchurl, appimageTools, makeWrapper, electron }:
+{ lib, stdenv, fetchurl, appimageTools, makeWrapper, electron_13 }:
 
 stdenv.mkDerivation rec {
   pname = "logseq";
-  version = "0.3.5";
+  version = "0.4.2";
 
   src = fetchurl {
     url = "https://github.com/logseq/logseq/releases/download/${version}/logseq-linux-x64-${version}.AppImage";
-    sha256 = "ruJALAI0YQNwG8An5VzoJX06Qu/pXZ9zsrPZ7EH+5Pk=";
+    sha256 = "BEDScQtGfkp74Gx3RKK8ItNQ9JD8AJkl1zdS/gZqyXk=";
     name = "${pname}-${version}.AppImage";
   };
 
@@ -36,7 +36,7 @@ stdenv.mkDerivation rec {
   '';
 
   postFixup = ''
-    makeWrapper ${electron}/bin/electron $out/bin/${pname} \
+    makeWrapper ${electron_13}/bin/electron $out/bin/${pname} \
       --add-flags $out/share/${pname}/resources/app
   '';
 

third_party/nixpkgs/pkgs/applications/misc/lutris/default.nix

@@ -15,6 +15,11 @@
 , webkitgtk
 , wrapGAppsHook
 
+  # check inputs
+, xvfb-run
+, nose
+, flake8
+
   # python dependencies
 , dbus-python
 , distro
@@ -46,7 +51,7 @@
 
 let
   # See lutris/util/linux.py
-  binPath = lib.makeBinPath [
+  requiredTools = [
     xrandr
     pciutils
     psmisc
@@ -64,6 +69,8 @@ let
     xorg.xkbcomp
   ];
 
+  binPath = lib.makeBinPath requiredTools;
+
   gstDeps = with gst_all_1; [
     gst-libav
     gst-plugins-bad
@@ -76,13 +83,13 @@ let
 in
 buildPythonApplication rec {
   pname = "lutris-original";
-  version = "0.5.8.4";
+  version = "0.5.9.1";
 
   src = fetchFromGitHub {
     owner = "lutris";
     repo = "lutris";
     rev = "v${version}";
-    sha256 = "sha256-5ivXIgDyM9PRvuUhPFPgziXDvggcL+p65kI2yOaiS1M=";
+    sha256 = "sha256-ykPJneCKbFKv0x/EDo9PkRb1LkMeFeYzTDmvE3ShNe0=";
   };
 
   nativeBuildInputs = [ wrapGAppsHook ];
@@ -111,6 +118,20 @@ buildPythonApplication rec {
     python_magic
   ];
 
+  checkInputs = [ xvfb-run nose flake8 ] ++ requiredTools;
+  preCheck = "export HOME=$PWD";
+  checkPhase = ''
+    runHook preCheck
+    xvfb-run -s '-screen 0 800x600x24' make test
+    runHook postCheck
+  '';
+
+  # unhardcodes xrandr and fixes nosetests
+  # upstream in progress: https://github.com/lutris/lutris/pull/3754
+  patches = [
+    ./fixes.patch
+  ];
+
   # avoid double wrapping
   dontWrapGApps = true;
   makeWrapperArgs = [
@@ -121,8 +142,6 @@ buildPythonApplication rec {
   # see https://github.com/NixOS/nixpkgs/issues/56943
   strictDeps = false;
 
-  preCheck = "export HOME=$PWD";
-
   meta = with lib; {
     homepage = "https://lutris.net";
     description = "Open Source gaming platform for GNU/Linux";

third_party/nixpkgs/pkgs/applications/misc/lutris/fixes.patch

@@ -0,0 +1,67 @@
+diff --git a/Makefile b/Makefile
+index 821a9500..75affa77 100644
+--- a/Makefile
++++ b/Makefile
+@@ -25,12 +25,12 @@ release: build-source upload upload-ppa
+ 
+ test:
+ 	rm tests/fixtures/pga.db -f
+-	nosetests3
++	nosetests
+ 
+ cover:
+ 	rm tests/fixtures/pga.db -f
+ 	rm tests/coverage/ -rf
+-	nosetests3 --with-coverage --cover-package=lutris --cover-html --cover-html-dir=tests/coverage
++	nosetests --with-coverage --cover-package=lutris --cover-html --cover-html-dir=tests/coverage
+ 
+ pgp-renew:
+ 	osc signkey --extend home:strycore
+diff --git a/lutris/util/graphics/xrandr.py b/lutris/util/graphics/xrandr.py
+index f788c94c..5544dbe9 100644
+--- a/lutris/util/graphics/xrandr.py
++++ b/lutris/util/graphics/xrandr.py
+@@ -5,6 +5,7 @@ from collections import namedtuple
+ 
+ from lutris.util.log import logger
+ from lutris.util.system import read_process_output
++from lutris.util.linux import LINUX_SYSTEM
+ 
+ Output = namedtuple("Output", ("name", "mode", "position", "rotation", "primary", "rate"))
+ 
+@@ -12,7 +13,7 @@ Output = namedtuple("Output", ("name", "mode", "position", "rotation", "primary"
+ def _get_vidmodes():
+     """Return video modes from XrandR"""
+     logger.debug("Retrieving video modes from XrandR")
+-    return read_process_output(["xrandr"]).split("\n")
++    return read_process_output([LINUX_SYSTEM.get("xrandr")]).split("\n")
+ 
+ 
+ def get_outputs():  # pylint: disable=too-many-locals
+@@ -76,7 +77,7 @@ def turn_off_except(display):
+     for output in get_outputs():
+         if output.name != display:
+             logger.info("Turning off %s", output[0])
+-            subprocess.Popen(["xrandr", "--output", output.name, "--off"])
++            subprocess.Popen([LINUX_SYSTEM.get("xrandr"), "--output", output.name, "--off"])
+ 
+ 
+ def get_resolutions():
+@@ -111,7 +112,7 @@ def change_resolution(resolution):
+             logger.warning("Resolution %s doesn't exist.", resolution)
+         else:
+             logger.info("Changing resolution to %s", resolution)
+-            subprocess.Popen(["xrandr", "-s", resolution])
++            subprocess.Popen([LINUX_SYSTEM.get("xrandr"), "-s", resolution])
+     else:
+         for display in resolution:
+             logger.debug("Switching to %s on %s", display.mode, display.name)
+@@ -128,7 +129,7 @@ def change_resolution(resolution):
+             logger.info("Switching resolution of %s to %s", display.name, display.mode)
+             subprocess.Popen(
+                 [
+-                    "xrandr",
++                    LINUX_SYSTEM.get("xrandr"),
+                     "--output",
+                     display.name,
+                     "--mode",

third_party/nixpkgs/pkgs/applications/misc/rootbar/default.nix

@@ -32,7 +32,7 @@ stdenv.mkDerivation rec {
   ];
 
   meta = with lib; {
-    homepage = "https://github.com/alexays/waybar";
+    homepage = "https://hg.sr.ht/~scoopta/rootbar";
     description = "A bar for Wayland WMs";
     longDescription = ''
       Root Bar is a bar for wlroots based wayland compositors such as sway and

third_party/nixpkgs/pkgs/applications/misc/themechanger/default.nix

@@ -15,14 +15,14 @@
 
 python3Packages.buildPythonApplication rec {
   pname = "themechanger";
-  version = "0.10.1";
+  version = "0.10.2";
   format = "other";
 
   src = fetchFromGitHub {
     owner = "ALEX11BR";
     repo = "ThemeChanger";
     rev = "v${version}";
-    sha256 = "1bxxn5bmdwaxfvyh6z2rxklwnxgvv6kh5y9m8r1k7d0n4msx1x2h";
+    sha256 = "00z1npm3lpvf0wc9z2v58pc4nxxh8x9m158kxf1k0qlz536jrzqr";
   };
 
   nativeBuildInputs = [

third_party/nixpkgs/pkgs/applications/misc/upwork/default.nix

@@ -6,15 +6,13 @@
 
 stdenv.mkDerivation rec {
   pname = "upwork";
-  version = "5.6.8.0";
+  version = "5.6.9.3";
 
   src = fetchurl {
-    url = "https://upwork-usw2-desktopapp.upwork.com/binaries/v5_6_8_0_836f43f6f6be4149/${pname}_${version}_amd64.deb";
+    url = "https://upwork-usw2-desktopapp.upwork.com/binaries/v5_6_9_3_10c2eb9781db4d7f/${pname}_${version}_amd64.deb";
-    sha256 = "b3a52f773d633837882dc107b206006325722ca5d5d5a1e8bdf5453f872e1b6f";
+    sha256 = "0b884aa6992d438cee09f58673780218a00a823e03c114b0c753947020c0a327";
   };
 
-  dontWrapGApps = true;
-
   nativeBuildInputs = [
     dpkg
     wrapGAppsHook
@@ -31,6 +29,10 @@ stdenv.mkDerivation rec {
 
   libPath = lib.makeLibraryPath buildInputs;
 
+  dontWrapGApps = true;
+  dontBuild = true;
+  dontConfigure = true;
+
   unpackPhase = ''
     dpkg-deb -x ${src} ./
   '';

third_party/nixpkgs/pkgs/applications/networking/browsers/chromium/upstream-info.json

@@ -1,8 +1,8 @@
 {
   "stable": {
-    "version": "94.0.4606.81",
+    "version": "95.0.4638.54",
-    "sha256": "16755mfqxxmvslm9ix060safrnml91ckj5p85960jj5g5hmslwbh",
+    "sha256": "1zb1009gg9962axn2l1krycz7ml20i8z2n3ka2psxpg68pbqivry",
-    "sha256bin64": "1d3z5np6b6jax7afak7f0yh76kmmdggdjlrzwyhy8hgrv7c7rsdz",
+    "sha256bin64": "0mf9jfzwz6nkz1yg8lndz1gmsvmdh1rxhqkv0vd9nr04h5x9b41a",
     "deps": {
       "gn": {
         "version": "2021-08-11",
@@ -12,15 +12,15 @@
       }
     },
     "chromedriver": {
-      "version": "94.0.4606.61",
+      "version": "95.0.4638.17",
-      "sha256_linux": "1l7ls8qqqd9q3a20a459q40jd9djzf67s8qfdmfj44vwgidiw0fj",
+      "sha256_linux": "0jqq2h3rjancq9gk4w29gcr4b3z4irnkbvcj97fdsnksck9y5h2q",
-      "sha256_darwin": "1b43agdd6vw5zarrbbk1sgmdr6n3d9cdl4dcikk304yplh58d49v"
+      "sha256_darwin": "0vl73i28xq3z5njg4287j08pb2sfd28amc8hkm4ddq5dgqpim0l8"
     }
   },
   "beta": {
-    "version": "95.0.4638.49",
+    "version": "95.0.4638.54",
-    "sha256": "11fiq6p2d99hl166pf39g83pk7m7ibi1zz19wj7qmcc7ql7006jz",
+    "sha256": "1zb1009gg9962axn2l1krycz7ml20i8z2n3ka2psxpg68pbqivry",
-    "sha256bin64": "04s81fnr01jq74fpl5n6jg8iw5iw6sdwyz40zja68h1crxh5d6d6",
+    "sha256bin64": "06d0kjnrv8z74icc6nahllxbwn3xxwn0vgc7ss47402zrqig8lch",
     "deps": {
       "gn": {
         "version": "2021-08-11",

third_party/nixpkgs/pkgs/applications/networking/cluster/fluxcd/default.nix

@@ -1,9 +1,9 @@
 { lib, buildGoModule, fetchFromGitHub, fetchzip, installShellFiles }:
 
 let
-  version = "0.17.2";
+  version = "0.18.3";
-  sha256 = "0kcdx4ldnshk4pqq37a7p08xr5cpsjrbrifk9fc3jbiw39m09mhf";
+  sha256 = "0nvvjc0ml1irn7vxyq4m43qimp128cx8hczk21y5m39i2rg4yzx4";
-  manifestsSha256 = "1v6md4xh4sq1vmb5a8qvb66l101fq75lmv2s4j2z3walssb5mmgj";
+  manifestsSha256 = "1qgw9ij0b85vvdx03wmbbwanhq1hf69wphy58lsqwf33rdq0bb1m";
 
   manifests = fetchzip {
     url = "https://github.com/fluxcd/flux2/releases/download/v${version}/manifests.tar.gz";
@@ -23,7 +23,7 @@ buildGoModule rec {
     inherit sha256;
   };
 
-  vendorSha256 = "sha256-glifJ0V3RwS7E6EWZsCa88m0MK883RhPSXCsAmMggVs=";
+  vendorSha256 = "0vgi5cnvmc98xa2ibpgvvqlc90hf3gj3v17yqncid596ig3dnqsc";
 
   nativeBuildInputs = [ installShellFiles ];
 

third_party/nixpkgs/pkgs/applications/networking/cluster/fluxcd/update.sh

@@ -20,11 +20,11 @@ setKV () {
 setKV version ${VERSION}
 setKV sha256 ${SHA256}
 setKV manifestsSha256 ${SPEC_SHA256}
-setKV vendorSha256 ""
+setKV vendorSha256 "0000000000000000000000000000000000000000000000000000" # The same as lib.fakeSha256
 
 cd ../../../../../
 set +e
-VENDOR_SHA256=$(nix-build --no-out-link -A fluxcd 2>&1 | grep "got:" | cut -d':' -f2 | sed 's| ||g')
+VENDOR_SHA256=$(nix-build --no-out-link -A fluxcd 2>&1 >/dev/null | grep "got:" | cut -d':' -f2 | sed 's| ||g')
 set -e
 
 cd - > /dev/null

third_party/nixpkgs/pkgs/applications/networking/cluster/helmfile/default.nix

@@ -2,13 +2,13 @@
 
 buildGoModule rec {
   pname = "helmfile";
-  version = "0.140.1";
+  version = "0.141.0";
 
   src = fetchFromGitHub {
     owner = "roboll";
     repo = "helmfile";
     rev = "v${version}";
-    sha256 = "sha256-QnGu/EGzgWva/EA6gKrDzWgjX6OrfZKzWIhRqKbexjU=";
+    sha256 = "sha256-UwjV3xgnZa0Emzw4FP/+gHh1ES6MTihrrlGKUBH6O9Q=";
   };
 
   vendorSha256 = "sha256-HKHMeDnIDmQ7AjuS2lYCMphTHGD1JgQuBYDJe2+PEk4=";

third_party/nixpkgs/pkgs/applications/networking/cluster/k3s/default.nix

@@ -243,6 +243,9 @@ stdenv.mkDerivation rec {
   pname = "k3s";
   version = k3sVersion;
 
+  # `src` here is a workaround for the updateScript bot. It couldn't be empty.
+  src = builtins.filterSource (path: type: false) ./.;
+
   # Important utilities used by the kubelet, see
   # https://github.com/kubernetes/kubernetes/issues/26093#issuecomment-237202494
   # Note the list in that issue is stale and some aren't relevant for k3s.

third_party/nixpkgs/pkgs/applications/networking/cluster/k3s/update.sh

@@ -12,7 +12,7 @@ LATEST_TAG_RAWFILE=${WORKDIR}/latest_tag.json
 curl --silent ${GITHUB_TOKEN:+"-u \":$GITHUB_TOKEN\""} \
     https://api.github.com/repos/k3s-io/k3s/releases > ${LATEST_TAG_RAWFILE}
 
-LATEST_TAG_NAME=$(jq 'map(.tag_name)' ${LATEST_TAG_RAWFILE} | grep -v -e rc -e engine | sed 's/["|,| ]//g' | sort -r | head -n1)
+LATEST_TAG_NAME=$(jq 'map(.tag_name)' ${LATEST_TAG_RAWFILE} | grep -v -e rc -e engine | sed 's/["|,| ]//g' | sort -V -r | head -n1)
 K3S_VERSION=$(echo ${LATEST_TAG_NAME} | sed 's/^v//')
 
 K3S_COMMIT=$(curl --silent ${GITHUB_TOKEN:+"-u \":$GITHUB_TOKEN\""} \

third_party/nixpkgs/pkgs/applications/networking/cluster/kubecfg/default.nix

@@ -15,6 +15,8 @@ buildGoPackage {
 
   goPackagePath = "github.com/bitnami/kubecfg";
 
+  ldflags = [ "-s" "-w" "-X main.version=v${version}" ];
+
   meta = {
     description = "A tool for managing Kubernetes resources as code";
     homepage = "https://github.com/bitnami/kubecfg";

third_party/nixpkgs/pkgs/applications/networking/cluster/linkerd/update-edge.sh

@@ -5,13 +5,11 @@ set -x -eu -o pipefail
 
 cd $(dirname "$0")
 
-TAG=$(curl ${GITHUB_TOKEN:+" -u \":$GITHUB_TOKEN\""} \
+VERSION=$(curl ${GITHUB_TOKEN:+" -u \":$GITHUB_TOKEN\""} \
     --silent https://api.github.com/repos/linkerd/linkerd2/releases | \
-    jq 'map(.tag_name)' | grep edge | sed 's/["|,| ]//g' | sort -r | head -n1)
+    jq 'map(.tag_name)' | grep edge | sed 's/["|,| ]//g' | sed 's/edge-//' | sort -V -r | head -n1)
 
-VERSION=$(echo ${TAG} | sed 's/^edge-//')
+SHA256=$(nix-prefetch-url --quiet --unpack https://github.com/linkerd/linkerd2/archive/refs/tags/edge-${VERSION}.tar.gz)
-
-SHA256=$(nix-prefetch-url --quiet --unpack https://github.com/linkerd/linkerd2/archive/refs/tags/${TAG}.tar.gz)
 
 setKV () {
     sed -i "s|$1 = \".*\"|$1 = \"${2:-}\"|" ./edge.nix
@@ -19,11 +17,11 @@ setKV () {
 
 setKV version ${VERSION}
 setKV sha256 ${SHA256}
-setKV vendorSha256 "" # Necessary to force clean build.
+setKV vendorSha256 "0000000000000000000000000000000000000000000000000000" # Necessary to force clean build.
 
 cd ../../../../../
 set +e
-VENDOR_SHA256=$(nix-build --no-out-link -A linkerd_edge 2>&1 | grep "got:" | cut -d':' -f2 | sed 's| ||g')
+VENDOR_SHA256=$(nix-build --no-out-link -A linkerd_edge 2>&1 >/dev/null | grep "got:" | cut -d':' -f2 | sed 's| ||g')
 set -e
 cd - > /dev/null
 

third_party/nixpkgs/pkgs/applications/networking/cluster/linkerd/update-stable.sh

@@ -5,13 +5,11 @@ set -x -eu -o pipefail
 
 cd $(dirname "$0")
 
-TAG=$(curl ${GITHUB_TOKEN:+" -u \":$GITHUB_TOKEN\""} \
+VERSION=$(curl ${GITHUB_TOKEN:+" -u \":$GITHUB_TOKEN\""} \
-    --silent https://api.github.com/repos/linkerd/linkerd2/releases/latest | \
+    --silent https://api.github.com/repos/linkerd/linkerd2/releases | \
-    jq -r '.tag_name')
+    jq 'map(.tag_name)' | grep stable | sed 's/["|,| ]//g' | sed 's/stable-//' | sort -V -r | head -n1)
 
-VERSION=$(echo ${TAG} | sed 's/^stable-//')
+SHA256=$(nix-prefetch-url --quiet --unpack https://github.com/linkerd/linkerd2/archive/refs/tags/stable-${VERSION}.tar.gz)
-
-SHA256=$(nix-prefetch-url --quiet --unpack https://github.com/linkerd/linkerd2/archive/refs/tags/${TAG}.tar.gz)
 
 setKV () {
   sed -i "s|$1 = \".*\"|$1 = \"${2:-}\"|" ./default.nix
@@ -19,11 +17,11 @@ setKV () {
 
 setKV version ${VERSION}
 setKV sha256 ${SHA256}
-setKV vendorSha256 "" # Necessary to force clean build.
+setKV vendorSha256 "0000000000000000000000000000000000000000000000000000" # Necessary to force clean build.
 
 cd ../../../../../
 set +e
-VENDOR_SHA256=$(nix-build --no-out-link -A linkerd 2>&1 | grep "got:" | cut -d':' -f2 | sed 's| ||g')
+VENDOR_SHA256=$(nix-build --no-out-link -A linkerd 2>&1 >/dev/null | grep "got:" | cut -d':' -f2 | sed 's| ||g')
 set -e
 cd - > /dev/null
 

third_party/nixpkgs/pkgs/applications/networking/cluster/nixops/default.nix

@@ -1,4 +1,5 @@
-{ pkgs
+{ nixosTests
+, pkgs
 , poetry2nix
 , lib
 , overrides ? (self: super: {})
@@ -59,10 +60,17 @@ let
     }
   ).python;
 
-in interpreter.pkgs.nixops.withPlugins(ps: [
+  pkg = interpreter.pkgs.nixops.withPlugins(ps: [
     ps.nixops-encrypted-links
     ps.nixops-virtd
     ps.nixops-aws
     ps.nixops-gcp
     ps.nixopsvbox
-])
+  ]) // rec {
+    # Workaround for https://github.com/NixOS/nixpkgs/issues/119407
+    # TODO after #1199407: Use .overrideAttrs(pkg: old: { passthru.tests = .....; })
+    tests = nixosTests.nixops.unstable.override { nixopsPkg = pkg; };
+    # Not strictly necessary, but probably expected somewhere; part of the workaround:
+    passthru.tests = tests;
+  };
+in pkg

third_party/nixpkgs/pkgs/applications/networking/cluster/terragrunt/default.nix

@@ -2,13 +2,13 @@
 
 buildGoModule rec {
   pname = "terragrunt";
-  version = "0.33.0";
+  version = "0.35.1";
 
   src = fetchFromGitHub {
     owner = "gruntwork-io";
     repo = pname;
     rev = "v${version}";
-    sha256 = "sha256-FvgB0jG6PEvhrT9Au/Uv9XSgKx+zNw8zETpg2dJ6QX4=";
+    sha256 = "sha256-DCum3vCrN530Z0VW0WEoLtjN+kre/mU9O+sJxckZgfc=";
   };
 
   vendorSha256 = "sha256-y84EFmoJS4SeA5YFIVFU0iWa5NnjU5yvOj7OFE+jGN0=";

third_party/nixpkgs/pkgs/applications/networking/flexget/default.nix

@@ -2,14 +2,14 @@
 
 python3Packages.buildPythonApplication rec {
   pname = "flexget";
-  version = "3.1.139";
+  version = "3.1.140";
 
   # Fetch from GitHub in order to use `requirements.in`
   src = fetchFromGitHub {
     owner = "flexget";
     repo = "flexget";
     rev = "v${version}";
-    sha256 = "0gnj89q5mv5qiy6zsp85sswmwzm0y73nffjj3vrccx5lmxd955nv";
+    sha256 = "15ngmpqqx902l7gxg2lb6h8q8vmjk247jbqhc92l1apr1imjqcc5";
   };
 
   postPatch = ''

third_party/nixpkgs/pkgs/applications/networking/instant-messengers/bitlbee/plugins.nix

@@ -1,20 +1,15 @@
-{ lib, stdenv, bitlbee }:
+{ lib, runCommandLocal, bitlbee }:
 
 with lib;
 
-plugins:
+plugins: runCommandLocal "bitlbee-plugins" {
-
+  inherit plugins;
-stdenv.mkDerivation {
-  inherit bitlbee plugins;
-  name = "bitlbee-plugins";
   buildInputs = [ bitlbee plugins ];
-  phases = [ "installPhase" ];
+} ''
-  installPhase = ''
   mkdir -p $out/lib/bitlbee
   for plugin in $plugins; do
     for thing in $(ls $plugin/lib/bitlbee); do
       ln -s $plugin/lib/bitlbee/$thing $out/lib/bitlbee/
     done
   done
-  '';
+''
-}

third_party/nixpkgs/pkgs/applications/networking/instant-messengers/element/element-desktop.nix

@@ -4,6 +4,7 @@
 , makeWrapper
 , makeDesktopItem
 , mkYarnPackage
+, fetchYarnDeps
 , electron
 , element-web
 , callPackage
@@ -13,27 +14,28 @@
 
 , useWayland ? false
 }:
-# Notes for maintainers:
-# * versions of `element-web` and `element-desktop` should be kept in sync.
-# * the Yarn dependency expression must be updated with `./update-element-desktop.sh <git release tag>`
 
 let
+  pinData = (builtins.fromJSON (builtins.readFile ./pin.json));
   executableName = "element-desktop";
-  version = "1.9.2";
+  electron_exec = if stdenv.isDarwin then "${electron}/Applications/Electron.app/Contents/MacOS/Electron" else "${electron}/bin/electron";
+in
+mkYarnPackage rec {
+  pname = "element-desktop";
+  inherit (pinData) version;
+  name = "${pname}-${version}";
   src = fetchFromGitHub {
     owner = "vector-im";
     repo = "element-desktop";
     rev = "v${version}";
-    sha256 = "sha256-F1uyyBbs+U7tQzRtn+p923Z/BY8Nwxr/JTMYwsak8W8=";
+    sha256 = pinData.desktopSrcHash;
   };
-  electron_exec = if stdenv.isDarwin then "${electron}/Applications/Electron.app/Contents/MacOS/Electron" else "${electron}/bin/electron";
-in
-mkYarnPackage rec {
-  name = "element-desktop-${version}";
-  inherit version src;
 
   packageJSON = ./element-desktop-package.json;
-  yarnNix = ./element-desktop-yarndeps.nix;
+  offlineCache = fetchYarnDeps {
+    yarnLock = src + "/yarn.lock";
+    sha256 = pinData.desktopYarnHash;
+  };
 
   nativeBuildInputs = [ makeWrapper ];
 
@@ -102,6 +104,8 @@ mkYarnPackage rec {
     '';
   };
 
+  passthru.updateScript = ./update.sh;
+
   meta = with lib; {
     description = "A feature-rich client for Matrix.org";
     homepage = "https://element.io/";

third_party/nixpkgs/pkgs/applications/networking/instant-messengers/element/element-web.nix

@@ -1,9 +1,7 @@
 { lib, stdenv, fetchurl, writeText, jq, conf ? {} }:
 
-# Note for maintainers:
-# Versions of `element-web` and `element-desktop` should be kept in sync.
-
 let
+  pinData = (builtins.fromJSON (builtins.readFile ./pin.json));
   noPhoningHome = {
     disable_guests = true; # disable automatic guest account registration at matrix.org
     piwik = false; # disable analytics
@@ -12,11 +10,11 @@ let
 
 in stdenv.mkDerivation rec {
   pname = "element-web";
-  version = "1.9.2";
+  inherit (pinData) version;
 
   src = fetchurl {
     url = "https://github.com/vector-im/element-web/releases/download/v${version}/element-v${version}.tar.gz";
-    sha256 = "sha256-Qkn0vyZGvBAeOfTzxydWzjFQJwY39INAhwZNX4xsM7U=";
+    sha256 = pinData.webHash;
   };
 
   installPhase = ''

third_party/nixpkgs/pkgs/applications/networking/instant-messengers/element/keytar/default.nix

@@ -1,15 +1,18 @@
 { lib, stdenv, fetchFromGitHub, nodejs-14_x, python3, callPackage
-, fixup_yarn_lock, yarn, pkg-config, libsecret, xcbuild, Security, AppKit }:
+, fixup_yarn_lock, yarn, pkg-config, libsecret, xcbuild, Security, AppKit, fetchYarnDeps }:
 
-stdenv.mkDerivation rec {
+let
+  pinData = (builtins.fromJSON (builtins.readFile ./pin.json));
+
+in stdenv.mkDerivation rec {
   pname = "keytar";
-  version = "7.7.0";
+  inherit (pinData) version;
 
   src = fetchFromGitHub {
     owner = "atom";
     repo = "node-keytar";
     rev = "v${version}";
-    sha256 = "0ajvr4kjbyw2shb1y14c0dsghdlnq30f19hk2sbzj6n9y3xa3pmi";
+    sha256 = pinData.srcHash;
   };
 
   nativeBuildInputs = [ nodejs-14_x python3 yarn pkg-config ]
@@ -19,7 +22,10 @@ stdenv.mkDerivation rec {
 
   npm_config_nodedir = nodejs-14_x;
 
-  yarnOfflineCache = (callPackage ./yarn.nix {}).offline_cache;
+  yarnOfflineCache = fetchYarnDeps {
+    yarnLock = ./yarn.lock;
+    sha256 = pinData.yarnHash;
+  };
 
   buildPhase = ''
     cp ${./yarn.lock} ./yarn.lock

third_party/nixpkgs/pkgs/applications/networking/instant-messengers/element/keytar/pin.json

@@ -0,0 +1,5 @@
+{
+  "version": "7.7.0",
+  "srcHash": "sd6h+vDJGvmXFhOm4MDAljb4dAOMBB8W1IL7JSfJWyo=",
+  "yarnHash": "1m75hvl06mcj260hicbmv75p94h73gw5d24zpm5wxwc0q8v8wzfl"
+}

third_party/nixpkgs/pkgs/applications/networking/instant-messengers/element/keytar/update.sh

@@ -1,19 +1,38 @@
 #!/usr/bin/env nix-shell
-#!nix-shell -I nixpkgs=../ -i bash -p wget yarn2nix yarn
+#!nix-shell -I nixpkgs=../../../../../../ -i bash -p wget prefetch-yarn-deps yarn
 
-set -euo pipefail
+if [ "$#" -gt 1 ] || [[ "$1" == -* ]]; then
-
+  echo "Regenerates packaging data for the seshat package."
-if [ "$#" -ne 1 ] || [[ "$1" == -* ]]; then
+  echo "Usage: $0 [git release tag]"
-  echo "Regenerates the Yarn dependency lock files."
-  echo "Usage: $0 <git release tag>"
   exit 1
 fi
 
-SRC="https://raw.githubusercontent.com/atom/node-keytar/$1"
+version="$1"
+
+set -euo pipefail
+
+if [ -z "$version" ]; then
+  version="$(wget -O- "https://api.github.com/repos/atom/node-keytar/releases?per_page=1" | jq -r '.[0].tag_name')"
+fi
+
+# strip leading "v"
+version="${version#v}"
+
+SRC="https://raw.githubusercontent.com/atom/node-keytar/v$version"
 
 wget "$SRC/package-lock.json"
 wget "$SRC/package.json"
 rm -f yarn.lock
 yarn import
-yarn2nix > yarn.nix
 rm -rf node_modules package.json package-lock.json
+yarn_hash=$(prefetch-yarn-deps yarn.lock)
+
+src_hash=$(nix-prefetch-github atom node-keytar --rev v${version} | jq -r .sha256)
+
+cat > pin.json << EOF
+{
+  "version": "$version",
+  "srcHash": "$src_hash",
+  "yarnHash": "$yarn_hash"
+}
+EOF

third_party/nixpkgs/pkgs/applications/networking/instant-messengers/element/pin.json

@@ -0,0 +1,6 @@
+{
+  "version": "1.9.2",
+  "desktopSrcHash": "F1uyyBbs+U7tQzRtn+p923Z/BY8Nwxr/JTMYwsak8W8=",
+  "desktopYarnHash": "0iwbszhaxaxggymixljzjb2gqrsij67fwakxhd3yj9g1zds49ghh",
+  "webHash": "1d9kdj65yk86hx087x1p0qkm0cffaqkwgwzl74g11g264szz8ja2"
+}

third_party/nixpkgs/pkgs/applications/networking/instant-messengers/element/seshat/default.nix

@@ -1,14 +1,17 @@
-{ lib, stdenv, rustPlatform, fetchFromGitHub, callPackage, sqlcipher, nodejs-14_x, python3, yarn, fixup_yarn_lock, CoreServices }:
+{ lib, stdenv, rustPlatform, fetchFromGitHub, callPackage, sqlcipher, nodejs-14_x, python3, yarn, fixup_yarn_lock, CoreServices, fetchYarnDeps }:
 
-rustPlatform.buildRustPackage rec {
+let
+  pinData = (builtins.fromJSON (builtins.readFile ./pin.json));
+
+in rustPlatform.buildRustPackage rec {
   pname = "seshat-node";
-  version = "2.3.0";
+  inherit (pinData) version;
 
   src = fetchFromGitHub {
     owner = "matrix-org";
     repo = "seshat";
     rev = version;
-    sha256 = "0zigrz59mhih9asmbbh38z2fg0sii2342q6q0500qil2a0rssai7";
+    sha256 = pinData.srcHash;
   };
 
   sourceRoot = "source/seshat-node/native";
@@ -18,7 +21,10 @@ rustPlatform.buildRustPackage rec {
 
   npm_config_nodedir = nodejs-14_x;
 
-  yarnOfflineCache = (callPackage ./yarn.nix {}).offline_cache;
+  yarnOfflineCache = fetchYarnDeps {
+    yarnLock = src + "/seshat-node/yarn.lock";
+    sha256 = pinData.yarnHash;
+  };
 
   buildPhase = ''
     cd ..
@@ -42,5 +48,5 @@ rustPlatform.buildRustPackage rec {
     cp -r . $out
   '';
 
-  cargoSha256 = "0habjf85mzqxwf8k15msm4cavd7ldq4zpxddkwd4inl2lkvlffqj";
+  cargoSha256 = pinData.cargoHash;
 }

third_party/nixpkgs/pkgs/applications/networking/instant-messengers/element/seshat/pin.json

@@ -0,0 +1,6 @@
+{
+  "version": "2.3.0",
+  "srcHash": "JyqtM1CCRgxAAdhgQYaIUYPnxEcDrlW1SjDCmsrPL34=",
+  "yarnHash": "0bym6i1f0i3bs4fncbiwzwmbxp7j14rz1v4kyvsl02qs97qw1jac",
+  "cargoHash": "sha256-EjtH96SC2kgan631+wlu9LStGKm6ljCR4x3/WpCTS0E="
+}

third_party/nixpkgs/pkgs/applications/networking/instant-messengers/element/seshat/update.sh

@@ -1,16 +1,49 @@
 #!/usr/bin/env nix-shell
-#!nix-shell -I nixpkgs=../ -i bash -p wget yarn2nix
+#!nix-shell -I nixpkgs=../../../../../../ -i bash -p wget prefetch-yarn-deps yarn nix-prefetch
 
-set -euo pipefail
+if [ "$#" -gt 1 ] || [[ "$1" == -* ]]; then
-
+  echo "Regenerates packaging data for the seshat package."
-if [ "$#" -ne 1 ] || [[ "$1" == -* ]]; then
+  echo "Usage: $0 [git release tag]"
-  echo "Regenerates the Yarn dependency lock files."
-  echo "Usage: $0 <git release tag>"
   exit 1
 fi
 
-SRC="https://raw.githubusercontent.com/matrix-org/seshat/$1"
+version="$1"
 
+set -euo pipefail
+
+if [ -z "$version" ]; then
+  version="$(wget -O- "https://api.github.com/repos/matrix-org/seshat/tags" | jq -r '.[] | .name' | sort --version-sort | tail -1)"
+fi
+
+SRC="https://raw.githubusercontent.com/matrix-org/seshat/$version"
+
+tmpdir=$(mktemp -d)
+trap 'rm -rf "$tmpdir"' EXIT
+
+pushd $tmpdir
 wget "$SRC/seshat-node/yarn.lock"
-yarn2nix > yarn.nix
+yarn_hash=$(prefetch-yarn-deps yarn.lock)
-rm yarn.lock
+popd
+
+src_hash=$(nix-prefetch-github matrix-org seshat --rev ${version} | jq -r .sha256)
+
+cat > pin.json << EOF
+{
+  "version": "$version",
+  "srcHash": "$src_hash",
+  "yarnHash": "$yarn_hash",
+  "cargoHash": "0000000000000000000000000000000000000000000000000000"
+}
+EOF
+
+cargo_hash=$(nix-prefetch "{ sha256 }: (import ../../../../../.. {}).element-desktop.seshat.cargoDeps")
+
+cat > pin.json << EOF
+{
+  "version": "$version",
+  "srcHash": "$src_hash",
+  "yarnHash": "$yarn_hash",
+  "cargoHash": "$cargo_hash"
+}
+EOF
+

third_party/nixpkgs/pkgs/applications/networking/instant-messengers/element/update-element-desktop.sh

@@ -1,17 +0,0 @@
-#!/usr/bin/env nix-shell
-#!nix-shell -I nixpkgs=../../../../../ -i bash -p wget yarn2nix nix-prefetch-git
-
-set -euo pipefail
-
-if [ "$#" -ne 1 ] || [[ "$1" == -* ]]; then
-  echo "Regenerates the Yarn dependency lock files for the element-desktop package."
-  echo "Usage: $0 <git release tag>"
-  exit 1
-fi
-
-RIOT_WEB_SRC="https://raw.githubusercontent.com/vector-im/element-desktop/$1"
-
-wget "$RIOT_WEB_SRC/package.json" -O element-desktop-package.json
-wget "$RIOT_WEB_SRC/yarn.lock" -O element-desktop-yarndeps.lock
-yarn2nix --no-patch --lockfile=element-desktop-yarndeps.lock > element-desktop-yarndeps.nix
-rm element-desktop-yarndeps.lock

third_party/nixpkgs/pkgs/applications/networking/instant-messengers/element/update.sh

@@ -0,0 +1,43 @@
+#!/usr/bin/env nix-shell
+#!nix-shell -I nixpkgs=../../../../../ -i bash -p nix wget prefetch-yarn-deps nix-prefetch-github
+
+if [ "$#" -gt 1 ] || [[ "$1" == -* ]]; then
+  echo "Regenerates packaging data for the element packages."
+  echo "Usage: $0 [git release tag]"
+  exit 1
+fi
+
+version="$1"
+
+set -euo pipefail
+
+if [ -z "$version" ]; then
+  version="$(wget -O- "https://api.github.com/repos/vector-im/element-desktop/releases?per_page=1" | jq -r '.[0].tag_name')"
+fi
+
+# strip leading "v"
+version="${version#v}"
+
+desktop_src="https://raw.githubusercontent.com/vector-im/element-desktop/v$version"
+
+desktop_src_hash=$(nix-prefetch-github vector-im element-desktop --rev v${version} | jq -r .sha256)
+web_hash=$(nix-prefetch-url "https://github.com/vector-im/element-web/releases/download/v$version/element-v$version.tar.gz")
+
+wget "$desktop_src/package.json" -O element-desktop-package.json
+
+tmpdir=$(mktemp -d)
+trap 'rm -rf "$tmpdir"' EXIT
+
+pushd $tmpdir
+wget "$desktop_src/yarn.lock"
+desktop_yarn_hash=$(prefetch-yarn-deps yarn.lock)
+popd
+
+cat > pin.json << EOF
+{
+  "version": "$version",
+  "desktopSrcHash": "$desktop_src_hash",
+  "desktopYarnHash": "$desktop_yarn_hash",
+  "webHash": "$web_hash"
+}
+EOF

third_party/nixpkgs/pkgs/applications/networking/instant-messengers/pidgin/default.nix

@@ -17,11 +17,11 @@
 let unwrapped = stdenv.mkDerivation rec {
   pname = "pidgin";
   majorVersion = "2";
-  version = "${majorVersion}.14.6";
+  version = "${majorVersion}.14.8";
 
   src = fetchurl {
     url = "mirror://sourceforge/pidgin/${pname}-${version}.tar.bz2";
-    sha256 = "bb45f7c032f9efd6922a5dbf2840995775e5584771b23992d04f6eff7dff5336";
+    sha256 = "1jjc15pfyw3012q5ffv7q4r88wv07ndqh0wakyxa2k0w4708b01z";
   };
 
   nativeBuildInputs = [ makeWrapper ];

third_party/nixpkgs/pkgs/applications/networking/instant-messengers/rocketchat-desktop/default.nix

@@ -0,0 +1,92 @@
+{ lib, stdenv, pkgs, fetchurl }:
+let
+  libPathNative = { packages }: lib.makeLibraryPath packages;
+in
+stdenv.mkDerivation rec {
+  pname = "rocketchat-desktop";
+  version = "3.5.7";
+
+  src = fetchurl {
+    url = "https://github.com/RocketChat/Rocket.Chat.Electron/releases/download/${version}/rocketchat_${version}_amd64.deb";
+    sha256 = "1ri8a60fsbqgq83f8wkyfnd59nqk4d0gpz1vanj54769zflpl71s";
+  };
+
+  buildInputs = with pkgs; [
+    gtk3
+    stdenv.cc.cc
+    zlib
+    glib
+    dbus
+    atk
+    pango
+    freetype
+    libgnome-keyring3
+    fontconfig
+    gdk-pixbuf
+    cairo
+    cups
+    expat
+    libgpg-error
+    alsa-lib
+    nspr
+    nss
+    xorg.libXrender
+    xorg.libX11
+    xorg.libXext
+    xorg.libXdamage
+    xorg.libXtst
+    xorg.libXcomposite
+    xorg.libXi
+    xorg.libXfixes
+    xorg.libXrandr
+    xorg.libXcursor
+    xorg.libxkbfile
+    xorg.libXScrnSaver
+    systemd
+    libnotify
+    xorg.libxcb
+    at-spi2-atk
+    at-spi2-core
+    libdbusmenu
+    libdrm
+    mesa
+    xorg.libxshmfence
+    libxkbcommon
+  ];
+
+  dontBuild = true;
+  dontConfigure = true;
+
+  unpackPhase = ''
+    ar p $src data.tar.xz | tar xJ ./opt/ ./usr/
+  '';
+
+  installPhase = ''
+    runHook preInstall
+    mkdir -p $out/bin
+    mv opt $out
+    mv usr/share $out
+    ln -s $out/opt/Rocket.Chat/rocketchat-desktop $out/bin/rocketchat-desktop
+    runHook postInstall
+  '';
+
+  postFixup =
+    let
+      libpath = libPathNative { packages = buildInputs; };
+    in
+    ''
+      app=$out/opt/Rocket.Chat
+      patchelf --set-interpreter "$(cat $NIX_CC/nix-support/dynamic-linker)" \
+        --set-rpath "${libpath}:$app" \
+        $app/rocketchat-desktop
+      sed -i -e "s|Exec=.*$|Exec=$out/bin/rocketchat-desktop|" $out/share/applications/rocketchat-desktop.desktop
+    '';
+
+  meta = with lib; {
+    description = "Official Desktop client for Rocket.Chat";
+    homepage = "https://github.com/RocketChat/Rocket.Chat.Electron";
+    license = licenses.mit;
+    maintainers = with maintainers; [ gbtb ];
+    platforms = platforms.x86_64;
+  };
+}

third_party/nixpkgs/pkgs/applications/networking/instant-messengers/signal-desktop/default.nix

@@ -23,7 +23,7 @@ let
       --set LC_MESSAGES "${spellcheckerLanguage}"'');
 in stdenv.mkDerivation rec {
   pname = "signal-desktop";
-  version = "5.19.0"; # Please backport all updates to the stable channel.
+  version = "5.20.0"; # Please backport all updates to the stable channel.
   # All releases have a limited lifetime and "expire" 90 days after the release.
   # When releases "expire" the application becomes unusable until an update is
   # applied. The expiration date for the current release can be extracted with:
@@ -33,7 +33,7 @@ in stdenv.mkDerivation rec {
 
   src = fetchurl {
     url = "https://updates.signal.org/desktop/apt/pool/main/s/signal-desktop/signal-desktop_${version}_amd64.deb";
-    sha256 = "0avns5axcfs8x9sv7hyjxi1cr7gag00avfj0h99wgn251b313g1a";
+    sha256 = "0a57gajxjqkp7zcmjc3iiys06b7v53nd81gkwrsfn2gmshihlzkd";
   };
 
   nativeBuildInputs = [

third_party/nixpkgs/pkgs/applications/networking/instant-messengers/slack/default.nix

@@ -33,6 +33,7 @@
 , nspr
 , nss
 , pango
+, pipewire
 , systemd
 , xdg-utils
 , xorg
@@ -119,6 +120,7 @@ let
       nspr
       nss
       pango
+      pipewire
       stdenv.cc.cc
       systemd
       xorg.libX11

third_party/nixpkgs/pkgs/applications/networking/mailreaders/meli/default.nix

@@ -15,15 +15,15 @@
 
 rustPlatform.buildRustPackage rec {
   pname = "meli";
-  version = "alpha-0.7.1";
+  version = "alpha-0.7.2";
 
   src = fetchgit {
     url = "https://git.meli.delivery/meli/meli.git";
     rev = version;
-    sha256 = "00iai2z5zydx9bw0ii0n6d7zwm5rrkj03b4ymic0ybwjahqzvyfq";
+    sha256 = "sha256-cbigEJhX6vL+gHa40cxplmPsDhsqujkzQxe0Dr6+SK0=";
   };
 
-  cargoSha256 = "1r54a51j91iv0ziasjygzw30vqqvqibcnwnkih5xv0ijbaly61n0";
+  cargoSha256 = "sha256-ZE653OtXyZ9454bKPApmuL2kVko/hGBWEAya1L1KIoc=";
 
   cargoBuildFlags = lib.optional withNotmuch "--features=notmuch";
 

third_party/nixpkgs/pkgs/applications/networking/msmtp/default.nix

@@ -9,11 +9,11 @@ let
 
 in stdenv.mkDerivation rec {
   pname = "msmtp";
-  version = "1.8.16";
+  version = "1.8.17";
 
   src = fetchurl {
     url = "https://marlam.de/${pname}/releases/${pname}-${version}.tar.xz";
-    sha256 = "1n271yr83grpki9szdirnk6wb5rcc319f0gmfabyw3fzyf4msjy0";
+    sha256 = "sha256-D92+dMGp3PZGG0obDbPk00JmGEUAxAPX8QetQttOxNM=";
   };
 
   patches = [