# The file below is copy/pasted from
# https://raw.githubusercontent.com/protesilaos/iosevka-comfy/0.2.1/private-build-plans.toml. It
# seems like ofborg will prevent me from using fetchurl to download
# this file automatically.
[buildPlans.iosevka-comfy]       # <iosevka-comfy> is your plan name
family = "Iosevka Comfy"         # Font menu family name
spacing = "normal"               # Optional; Values: `normal`, `quasi-proportional`, `quasi-proportional-extension-only`, `term`, `fontconfig-mono`, or `fixed`
serifs = "sans"                  # Optional; Values: `sans` or `slab`

###################################################################################################
# Configure variants

# # Optional; Whether to inherit a `ss##` variant
# [buildPlans.iosevka-comfy.variants]
# inherits = "ss01"

# Optional; Configure single character's variant
[buildPlans.iosevka-comfy.variants.design]
cv01 = 1    # A cap straight
cv02 = 1    # B cap straight
cv03 = 1    # C cap serifless
cv04 = 6    # D cap curly with top and bottom serif (without serifs TODO reads like TOOO at small point sizes)
cv05 = 1    # E cap serifless
cv06 = 1    # F cap serifless
cv07 = 4    # G cap toothed
cv08 = 1    # H cap serifless
cv09 = 1    # I cap long serifs
cv10 = 2    # J cap serified
cv11 = 2    # K cap curly
cv12 = 1    # L cap serifless
cv13 = 3    # M cap short middle leg slanted sides
cv14 = 1    # N cap symmetric
cv15 = 1    # P cap straight
cv16 = 4    # Q cap crossing tail
cv17 = 1    # R cap straight
cv18 = 1    # S cap serifless
cv19 = 1    # T cap serifless
cv20 = 3    # U cap serifless
cv21 = 1    # V cap straight
cv22 = 1    # W straight
cv23 = 1    # X cap straight
cv24 = 1    # Y cap straight
cv25 = 1    # Z cap straight
cv26 = 10   # a single storey earless tailed bottom
cv27 = 1    # b toothed
cv28 = 1    # c serifless
cv29 = 1    # d toothed
cv33 = 1    # h straight
cv34 = 10   # i serified flat tailed
cv35 = 6    # j flat hook serified
cv37 = 10   # l serified flat tailed
cv42 = 9    # r compact
cv43 = 1    # s serifless
cv44 = 2    # t flat hook
cv45 = 4    # u tailed
cv49 = 6    # y cursive flat terminal hook
cv53 = 1    # Λ, Δ lambda and delta cap straight
cv54 = 2    # α alpha straight tailed
VXAA = 1    # δ delta rounded top
cv55 = 1    # Γ gamma cap straight
cv56 = 6    # ι iota serified flat tailed
cv57 = 2    # λ lambda top tailed
VXAC = 1    # μ me tailless
VXAB = 2    # ξ xe flat top
cv71 = 13   # 0 oval dashed forward slash
cv74 = 2    # 3 arched
cv76 = 2    # 5 open contour
cv78 = 1    # 7 straight
cv79 = 3    # 8 two asymmetric circles
cv81 = 2    # ~ tilde low
cv82 = 2    # * asterisk five-pointed low
cv83 = 1    # _ underscore right below baseline
cv85 = 1    # ^ uptick high
cv86 = 1    # ( parentheses normal slope
cv87 = 2    # { braces curly
cv88 = 1    # # column straight
cv90 = 4    # @ three-fold, tall height
cv91 = 2    # $ dollar strike through
cv92 = 2    # ¢ cent strike through
cv93 = 1    # % percent dots
cv94 = 1    # | bar natural slope
cv95 = 2    # ≥ equal-or-{higher,lower} slanted
cv96 = 1    # ' single quote straight
cv97 = 1    # ` grave/backtick straight
cv98 = 1    # ? smooth
cv99 = 2    # .:; square punctuation marks
VXDD = 2    # ijäöü square diacretics

# Optional; Configure single character's variant for Upright and Oblique; Overrides [design]
[buildPlans.iosevka-comfy.variants.upright]
cv30 = 1    # e straight
cv31 = 16   # f serifless bottom flat top crossbar at x height
cv32 = 9    # g single storey flat hook earless cornered top
cv36 = 1    # k straight
cv38 = 6    # m earless double arch short middle leg
cv39 = 3    # n earless straight
cv40 = 2    # p earless
cv41 = 2    # q earless
cv46 = 1    # v straight
cv47 = 1    # w straight
cv48 = 1    # x straight
cv50 = 1    # z straight
cv72 = 3    # 1 serified with base
cv73 = 1    # 2 straight
cv75 = 3    # 4 semi-open contour
cv77 = 3    # 6 straight
cv80 = 3    # 9 straight
cv89 = 2    # & et open top (ampersand)

# Optional; Configure single character's variant for Italic only; Overrides [design]
[buildPlans.iosevka-comfy.variants.italic]
cv30 = 2    # e curly
cv31 = 14   # f extended flat top bottom hook
cv32 = 7    # g single storey flat hook
cv36 = 2    # k curly
cv38 = 2    # m straight middle shortleg
cv39 = 1    # n straight
cv40 = 1    # p straight
cv41 = 1    # q straight
cv46 = 2    # v curly
cv47 = 2    # w curly short middle top
cv48 = 2    # x curly
cv50 = 4    # z curly
cv72 = 2    # 1 serified no base
cv73 = 2    # 2 curly
cv75 = 1    # 4 closed contour crossing
cv77 = 1    # 6 closed contour
cv80 = 1    # 9 closed contour
cv89 = 4    # & et open top toothed (ampersand)

# End variant section
###################################################################################################

###################################################################################################
# Override default building weights
# When buildPlans.<plan name>.weights is absent, all weights would built and mapped to
# default values.
# IMPORTANT : Currently "menu" and "css" property only support numbers between 0 and 1000.
#             and "shape" properly only supports number between 100 and 900 (inclusive).
#             If you decide to use custom weights you have to define all the weights you
#             plan to use otherwise they will not be built.
[buildPlans.iosevka-comfy.weights.light]
shape = 300
menu  = 300
css   = 300

[buildPlans.iosevka-comfy.weights.semilight]
shape = 350
menu  = 350
css   = 350

[buildPlans.iosevka-comfy.weights.regular]
shape = 400
menu  = 400
css   = 400

[buildPlans.iosevka-comfy.weights.bold]
shape = 700
menu  = 700
css   = 700

[buildPlans.iosevka-comfy.weights.extrabold]
shape = 800
menu  = 800
css   = 800

# End weight section
###################################################################################################

###################################################################################################
# Override default building slope sets
# When this section is absent, all slopes would be built.

[buildPlans.iosevka-comfy.slopes.upright]
angle = 0             # Angle in degrees. Valid range [0, 15]
shape = "upright"     # Slope grade used for shape selection.  `upright` | `oblique` | `italic`
menu  = "upright"     # Slope grade used for naming.           `upright` | `oblique` | `italic`
css   = "normal"      # Slope grade used for webfont CSS.      `normal`  | `oblique` | `italic`

[buildPlans.iosevka-comfy.slopes.italic]
angle = 9.4
shape = "italic"
menu  = "italic"
css   = "italic"

# End slope section
###################################################################################################

###################################################################################################
# Override default building widths
# When buildPlans.<plan name>.widths is absent, all widths would built and mapped to
# default values.
# IMPORTANT : Currently "shape" property only supports numbers between 434 and 664 (inclusive),
#             while "menu" only supports integers between 1 and 9 (inclusive).
#             The "shape" parameter specifies the unit width, measured in 1/1000 em. The glyphs'
#             width are equal to, or a simple multiple of the unit width.
#             If you decide to use custom widths you have to define all the widths you plan to use,
#             otherwise they will not be built.

# [buildPlans.iosevka-comfy.widths.condensed]
# shape = 485
# menu  = 3
# css   = "condensed"

[buildPlans.iosevka-comfy.widths.normal]
shape = 525        # Unit Width, measured in 1/1000 em.
menu  = 5          # Width grade for the font's names.
css   = "normal"   # "font-stretch' property of webfont CSS.

# [buildPlans.iosevka-comfy.widths.expanded]
# shape = 600
# menu  = 7
# css   = "expanded"

# End width section
###################################################################################################

###################################################################################################
# Metric overrides
# Certain metrics like line height (leading) could be overridden in your build plan file.
# Edit the values to change the metrics. Remove this section when overriding is not needed.

[buildPlans.iosevka-comfy.metric-override]
leading = 1100

# End metric override section
###################################################################################################


# Iosevka Comfy variants
# ======================
# Same glyph overrides and metrics, except for the spacing.


# Fixed spacing (no ligatures)
# ----------------------------
[buildPlans.iosevka-comfy-fixed]
family = "Iosevka Comfy Fixed"
spacing = "fixed"
serifs = "sans"

# It seems we can inherit variants, but not weights, slopes, widths,
# metric-override...
[buildPlans.iosevka-comfy-fixed.variants]
inherits = "buildPlans.iosevka-comfy"

[buildPlans.iosevka-comfy-fixed.weights.light]
shape = 300
menu  = 300
css   = 300

[buildPlans.iosevka-comfy-fixed.weights.semilight]
shape = 350
menu  = 350
css   = 350

[buildPlans.iosevka-comfy-fixed.weights.regular]
shape = 400
menu  = 400
css   = 400

[buildPlans.iosevka-comfy-fixed.weights.bold]
shape = 700
menu  = 700
css   = 700

[buildPlans.iosevka-comfy-fixed.weights.extrabold]
shape = 800
menu  = 800
css   = 800

[buildPlans.iosevka-comfy-fixed.slopes.upright]
angle = 0
shape = "upright"
menu  = "upright"
css   = "normal"

[buildPlans.iosevka-comfy-fixed.slopes.italic]
angle = 9.4
shape = "italic"
menu  = "italic"
css   = "italic"

[buildPlans.iosevka-comfy-fixed.widths.normal]
shape = 525
menu  = 5
css   = "normal"

[buildPlans.iosevka-comfy-fixed.metric-override]
leading = 1100



# Duo spacing (quasi-proportional)
# --------------------------------
[buildPlans.iosevka-comfy-duo]
family = "Iosevka Comfy Duo"
spacing = "quasi-proportional"
serifs = "sans"

# It seems we can inherit variants, but not weights, slopes, widths,
# metric-override...
[buildPlans.iosevka-comfy-duo.variants]
inherits = "buildPlans.iosevka-comfy"

# The '0' has a forward slash that cuts diagonally through the middle of
# the circle, connecting the bottom left part to the top right of the
# oval shape.  Whereas the narrow variants have a dashed forward slash
# which does not connect the two sides as it is positioned inside the
# oval shape.
[buildPlans.iosevka-comfy-duo.variants.design]
cv71 = 9    # 0 oval forward slash

# The 'm' character has three legs of equal length, insetad of a shorter
# middle leg.  The short middle leg in the narrow variants is necessary
# for legibility, especially at small point sizes (otherwise the
# character's legs visually blend into what appears to be a solid
# block).
[buildPlans.iosevka-comfy-duo.variants.upright]
cv38 = 5    # m earless normal middle leg

[buildPlans.iosevka-comfy-duo.variants.italic]
cv38 = 1    # m straight normal middle leg

[buildPlans.iosevka-comfy-duo.weights.light]
shape = 300
menu  = 300
css   = 300

[buildPlans.iosevka-comfy-duo.weights.semilight]
shape = 350
menu  = 350
css   = 350

[buildPlans.iosevka-comfy-duo.weights.regular]
shape = 400
menu  = 400
css   = 400

[buildPlans.iosevka-comfy-duo.weights.bold]
shape = 700
menu  = 700
css   = 700

[buildPlans.iosevka-comfy-duo.weights.extrabold]
shape = 800
menu  = 800
css   = 800

[buildPlans.iosevka-comfy-duo.slopes.upright]
angle = 0
shape = "upright"
menu  = "upright"
css   = "normal"

[buildPlans.iosevka-comfy-duo.slopes.italic]
angle = 9.4
shape = "italic"
menu  = "italic"
css   = "italic"

[buildPlans.iosevka-comfy-duo.widths.normal]
shape = 525
menu  = 5
css   = "normal"

[buildPlans.iosevka-comfy-duo.metric-override]
leading = 1100



# Like iosevka-comfy but expanded
# -------------------------------
[buildPlans.iosevka-comfy-wide]
family = "Iosevka Comfy Wide"
spacing = "normal"
serifs = "sans"

# It seems we can inherit variants, but not weights, slopes, widths,
# metric-override...
[buildPlans.iosevka-comfy-wide.variants]
inherits = "buildPlans.iosevka-comfy"

# The '0' has a forward slash that cuts diagonally through the middle of
# the circle, connecting the bottom left part to the top right of the
# oval shape.  Whereas the narrow variants have a dashed forward slash
# which does not connect the two sides as it is positioned inside the
# oval shape.
[buildPlans.iosevka-comfy-wide.variants.design]
cv71 = 9    # 0 oval forward slash

# The 'm' character has three legs of equal length, insetad of a shorter
# middle leg.  The short middle leg in the narrow variants is necessary
# for legibility, especially at small point sizes (otherwise the
# character's legs visually blend into what appears to be a solid
# block).
[buildPlans.iosevka-comfy-wide.variants.upright]
cv38 = 5    # m earless normal middle leg

[buildPlans.iosevka-comfy-wide.variants.italic]
cv38 = 1    # m straight normal middle leg

[buildPlans.iosevka-comfy-wide.weights.light]
shape = 300
menu  = 300
css   = 300

[buildPlans.iosevka-comfy-wide.weights.semilight]
shape = 350
menu  = 350
css   = 350

[buildPlans.iosevka-comfy-wide.weights.regular]
shape = 400
menu  = 400
css   = 400

[buildPlans.iosevka-comfy-wide.weights.bold]
shape = 700
menu  = 700
css   = 700

[buildPlans.iosevka-comfy-wide.weights.extrabold]
shape = 800
menu  = 800
css   = 800

[buildPlans.iosevka-comfy-wide.slopes.upright]
angle = 0
shape = "upright"
menu  = "upright"
css   = "normal"

[buildPlans.iosevka-comfy-wide.slopes.italic]
angle = 9.4
shape = "italic"
menu  = "italic"
css   = "italic"

# For the default width, check buildPlans.iosevka-comfy.widths.normal
[buildPlans.iosevka-comfy-wide.widths.normal]
shape = 625
menu  = 7
css   = "normal"

[buildPlans.iosevka-comfy-wide.metric-override]
leading = 1100



# Like iosevka-comfy-wide but fixed monospace (no ligatures)
# ----------------------------------------------------------
[buildPlans.iosevka-comfy-wide-fixed]
family = "Iosevka Comfy Wide Fixed"
spacing = "fixed"
serifs = "sans"

# It seems we can inherit variants, but not weights, slopes, widths,
# metric-override...
[buildPlans.iosevka-comfy-wide-fixed.variants]
inherits = "buildPlans.iosevka-comfy-wide"

[buildPlans.iosevka-comfy-wide-fixed.weights.light]
shape = 300
menu  = 300
css   = 300

[buildPlans.iosevka-comfy-wide-fixed.weights.semilight]
shape = 350
menu  = 350
css   = 350

[buildPlans.iosevka-comfy-wide-fixed.weights.regular]
shape = 400
menu  = 400
css   = 400

[buildPlans.iosevka-comfy-wide-fixed.weights.bold]
shape = 700
menu  = 700
css   = 700

[buildPlans.iosevka-comfy-wide-fixed.weights.extrabold]
shape = 800
menu  = 800
css   = 800

[buildPlans.iosevka-comfy-wide-fixed.slopes.upright]
angle = 0
shape = "upright"
menu  = "upright"
css   = "normal"

[buildPlans.iosevka-comfy-wide-fixed.slopes.italic]
angle = 9.4
shape = "italic"
menu  = "italic"
css   = "italic"

# For the default width, check buildPlans.iosevka-comfy.widths.normal
[buildPlans.iosevka-comfy-wide-fixed.widths.normal]
shape = 625
menu  = 7
css   = "normal"

[buildPlans.iosevka-comfy-wide-fixed.metric-override]
leading = 1100